The problem here is that because I can't log into the console, I can't
run any administrative commands. dsmadmc and dsmc both won't recognize
me. dsmc returns:

dsmc> query access
Node Name: CLIENT
ANS1353E Session rejected: Unknown or incorrect ID entered

Any other ideas?

Thanks.

On Wed, 7 Jul 1999 23:54:42 -0700, you wrote:

>Hi,
> I think you have a problem with administrator user , you can check
>with "q admin f=d" command from server console these permisions,
>besides it can also happen that the administrator user is not defined.
> The second part is you need to register the node in the server so that
>this one can be detected by the server.
>
>--- Richard Chan <rchan AT TSPN DOT COM> wrote:
>> I have installed ADSM (I believe the version is
>> 3.1.2.0) on AIX
>> 4.3.2.0. It is a single standalone system. There
>> were no errors during
>> installation. Whenever I run dsmadmc from the
>> command line and log in
>> as admin, it immediately replies with:
>>
>> ANS8034E Your administrator ID is not recognized by
>> this server.
>> ANS8023E Unable to establish session with server.
>>
>> ANS Highest return code was 53.
>>
>> I can run /usr/lpp/adsmserv/ezadsm/adsm, which
>> brings allows me to
>> choose from ADSM utilities, ADSM Server, ADSM
>> Backup-Archive Client,
>> etc... When I run ADSM Server and Begin Session, it
>> gives me the same
>> error messages. When I run the Backup-Archive
>> Client, it asks me to
>> log in as CLIENT. No matter which password I specify
>> (client, CLIENT,
>> or blank), it gives me:
>>
>> Node ID unknown to server
>>
>> When I open the ADSM Utilities and run the
>> Sequential Device
>> Configuration Assistant, it comes back with:
>>
>> Cannot continue - Cannot establish a session with
>> the ADSM server.
>>
>> Please ensure that your ADSM client system file
>> (dsm.sys) includes an
>> entry for the local ADSM server and try again...
>>
>> I am attaching the files I believe to be relevant.
>> Any help is greatly
>> appreciated.
>>
>> FILES:
>>
>> # cat /usr/lpp/adsmserv/ezadsm/dsm.opt
>> * SErvername emc
>> Servername         localSrv
>>
>> * nodename   client
>> Nodename           client
>>
>> # cat /usr/lpp/adsm/bin/dsm.opt
>> virtualnode        client
>> Servername         localSrv
>>
>> # cat /usr/lpp/adsm/bin/dsm.sys
>> *//ADSM_LOCAL_SERVER_STANZA
>> Servername         localSrv
>> TCPPort            1500
>> TCPServeraddress   aix
>> *//END_ADSM_LOCAL_SERVER_STANZA
>>
>> *//ADSM_TOUR_STANZA
>> Servername         adsmTour
>> TCPPort            32767
>> TCPServeraddress   aix
>> *//END_ADSM_TOUR_STANZA
>>
>> # cat /usr/lpp/adsmserv/bin/dsmserv.opt
>> COMMmethod HTTP
>> HTTPPort 1580
>> COMMmethod TCPIP
>> TCPPort 1500
>> TCPWindowsize 0
>> TCPNODELAY Yes
>> COMMmethod SHAREDMEM
>> SHMPort 1510
>> MSGINTerval 1
>> MAXSessions 25
>> BUFPoolsize 2048
>> LOGPoolsize 512
>> COMMTimeout 60
>> IDLETimeout 15
>> TXNGroupmax 40
>> DATEformat 1
>> TIMEformat 1
>> LANGuage AMENG
>> NUMberformat 1
>> EXPInterval 24
>> EXPQUiet No
>> MIRRORRead DB Verify
>> MIRRORWrite DB Parallel
>> MIRRORRead LOG Verify
>> MIRRORWrite LOG Parallel
>> MESsageformat 1
>> MOVEBatchsize 40
>> MOVESizethresh 500
>> STAtusmsgcnt 1
>> ENABLE3590LIBrary No
>> RESTOREINTerval 1440
>>
>> # cat /etc/hosts
>> 127.0.0.1               loopback localhost      #
>> loopback (lo0)
>> name/address
>> 10.0.0.5        aix.ffwd.ca aix local localSrv
>> client#
>>
>
>_________________________________________________________
>Do You Yahoo!?
>Get your free @yahoo.com address at http://mail.yahoo.com