Mecki,
Yes, I use FORMAT=DRIVE. In defining the device class, I used the
following command:
DEFINE DEVCLASS 7331_LIB1 DEVTYPE=8MM FORMAT=DRIVE LIBRARY=TAPELIBRARY1
MOUNTRETENTION=1 MOUNTLIMIT=DRIVES
Thank you.
Logan.
On Wed, 19 May 1999, Mecki M. wrote:
> Hi Logan,
>
> which setting do you use in your devclass for FORMAT (=DRIVE should work,
> but you might have to use other's)?
>
> Regards
> Mecki
>
|