ADSM-L

Re: Checkin libv problem "Storage Tech CAP LOCKED, NO ENTRY"

1999-05-05 17:56:41
Subject: Re: Checkin libv problem "Storage Tech CAP LOCKED, NO ENTRY"
From: John Stephens <Stephens AT STORSOL DOT COM>
Date: Wed, 5 May 1999 17:56:41 -0400
Kyle:
I have experienced this with the STK 9730, you should be able to press the
menu button and  then the Execute button to reset the Cap lock mode. If this
is not correct , I know there is a command that will free this locked state.
I will try and find it for you...

John Stephens
ADSM Certified Professional
Storage Solutions Specialists, Inc.
http://www.Storsol.com
Stephens AT Storsol DOT com
813-505-2526



> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf Of
> Kyle Payne
> Sent: Wednesday, May 05, 1999 5:01 PM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Checkin libv problem "Storage Tech CAP LOCKED, NO ENTRY"
>
>
> ADSMers,
>         We have a problem.  If the wrong tape is put in the
> entry/exit port on our
> Storage Tech 9730 library does not let us remove the wrong tape so we can
> put in the right one.  Has anyone encountered this?  Is it and
> ADSM issue or
> a Storage Tech issue?
>
> The procedure is as follows:
>         1) The following command is run: checkin libv LB0.0.0.6 000006
> status=scratch (library name=LB0.0.0.6 volume name=     000006).
>         2) The wrong volume is placed in the door.
>         3) The request is replied to.
>         4) ADSM checks the volume label and sees it is the wrong
> one.  It puts the
> volume back in the entry exit door.
>         5) The activity log has the following message ANR8786I
> 0001: Remove DLT
> volume from entry/exit port; insert volume 000006       R/W into
> entry/exit port
> of library LB0.0.0.6 within 60 minute(s); issue 'REPLY' along with the
> request ID when ready.
>         6) THE PROBLEM IS HERE - We can't open the entry exit
> port.  The LCD screen
> on the library says "CAP LOCKED, NO     ENTRY".
>
>         I know that these libraries can be opened and that the
> tape can be removed
> and replaced from inside once the door is open but      this is
> not an option.
> The libraries need to be locked and the tapes need to come through the
> entry/exit port because we don't        want our operators
> opening up the library
> door.
>
>         Is there a way that we can  over ride the library and get
> it to unlock the
> cap?
>
> Thanks,
>         Kyle
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Kyle Payne
> Berbee Information Networks Corp.
> 4000 W. Spencer Street
> Appleton WI, 54914
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> payne AT berbee DOT com        - e-mail
> pgpayne AT berbee DOT com      - pager e-mail
> (920) 586-3014          - pager
> (920) 450-0413          - cell
> (920) 997-9420 x.46     - work
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
<Prev in Thread] Current Thread [Next in Thread>