ADSM-L

Re: ADSM V3R1 for Solaris

1999-03-16 07:11:04
Subject: Re: ADSM V3R1 for Solaris
From: Gregory Witham <withgr AT ROCKETMAIL DOT COM>
Date: Tue, 16 Mar 1999 04:11:04 -0800
Steve:

It's early, but after seeing your mail, there is hope. It's sunny, MCI
sits on a small lake, geez, I even feel mildly optimistic!

If it works, I'll owe you a cold one.

Later unix dude!



===

Gregory F. Witham - Tivoli TME 10 Administrator
MCI-Global Network Management Center-Cary N.C.
Hotel Phone 919/677-3157
withgr AT rocketmail DOT com H-937/890-8786-OH W-919/378-3939
Beeper 1-800-PAGE-MCI # 1721486

Maybe, just once, someone will call me 'sir' without adding, 'you're
making a scene.'
-- Homer Simpson
---Steven P Roder <tkssteve AT REXX.ACSU.BUFFALO DOT EDU> wrote:
---Steven P Roder <tkssteve AT REXX.ACSU.BUFFALO DOT EDU> wrote:
>
>
> >
> > I trying to add an ADSM for Solaris 2.6. The box is a Sun Ultra 2
> > Enterprise. The library is a Sun L1000. I can't get the library to
> > intitialize. If I issue the "mt -f /dev/rmt/0 status" command it
> > recognizes that a DLT7000 is attached.
>
> You should comment out the target id for the library from
> /kernel/drv/st.conf, as you are going to configure IBM's mt/lb
drivers,
> by adding the entires to /usr/kernel/drv/lb.conf (library), and
> /usr/kernel/drv/mt.conf (drives).
>
> The, as root, issue the commands:
>
> /usr/sbin/add_drv -m '* 0666 bin bin' /usr/kernel/drv/mt
> /usr/sbin/add_drv -m '* 0666 bin bin' /usr/kernel/drv/lb
>
> Look in /dev/rmt for the lb and mt entries.
>
> You can then define the library, and the drives.
>
> If you want to unload mt and lb:
>
> /usr/sbin/rem_drv mt
> /usr/sbin/rem_drv lb
>
> Hope this helps.
>
> Steve (unVMix Systems Programmer/Dude) Roder
> (tkssteve AT ubvm.cc.buffalo DOT edu | tkssteve AT acsu.buffalo DOT edu |
(716)645-3564 ,
>    | http://ubvm.cc.buffalo.edu/~tkssteve)
>

_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
<Prev in Thread] Current Thread [Next in Thread>