Hi all,

We also have several problems with our MagStar 3570 in combination of a Adaptec
AHA2944 adapter.
We are using under Windows NT 4.0 the following driver:
Name : AIC78xx.SYS
Size : 67.184 bytes
Version : 2.11S3

Does anyone have experience with that driver ?

with kind regards, / met vriendelijke groeten,
Johan Pol
Boerhaavelaan 11 - 2713 HA - Zoetermeer - Tel. (+31)79 3223051 - Fax. (+31)79
3213989
Internet :JPol AT nl.ibm DOT com / johan.pol AT xerion.be.philips DOT com


---------------------- Forwarded by Johan Pol/Netherlands/Contr/IBM on 10-11-98
10-11-98
13:11 ---------------------------


ADSM-L AT VM.MARIST DOT EDU on 10-11-98 12:10:28
Please respond to ADSM-L AT VM.MARIST DOT EDU
To: ADSM-L AT VM.MARIST DOT EDU
cc:
Subject: Betr: 3570 problems again


     Michael,

     your problem with the adsmscsi isn't local to the 3570, I've had the
     same problems on an ADIC 458 with an LH Pro 3 and Adaptec AHA2940 scsi
     card. I haven't been able to pinpoint the cause of the problem but I'm
     getting suspicious about the drivers used to drive the scsi card(s).
     After a hardware switch we started getting problems as you described.
     The only way to get the library visible was to bring down the tape
     unit and NT system (like lights out), do some twiggling with the
     cables (very pro like) and restart everything (tapeunit first). The
     tape unit would then be recognized by adsmscsi.sys.  Later I found out
     that the person's responsible for installing the NT machine used
     (outdated 1996) Adaptec drivers found on the hardware manufacturers
     install CD. I have configurations running the same hardware but using
     the latest V5 release Adaptec drives and up till now haven't seen any
     adsmscis errors.

     regards, groeten,

     Walter Ridderhof


____________________________ Antwoord-separator ________________________________
Onderwerp: 3570 problems again
Auteur:  "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU> in inet-1
Datum:    11/9/98 5:29 PM


Hi!

Some days ago I complained about my ongoing Problems with our 3570. An IBM
CE came in today and changed some parts.
He also put us to the latest Microcode Level.

Now the library is capable of running the Power-On-Self-Test without any
problems. Still ADSM is refusing to use the lib as we see
a lot of SCSI errors in the Windows NT Event Log. The error displayed is:

"The description for Event ID ( 11 ) in Source ( AdsmScsi ) could not be
found. It contains the following insertion string(s): \Device\lb0.1.0.1."

Any ideas on that? We think about exchanging the SCSI Controller in our NT
box but is there something I can do before that?

Mit freundlichem Gruss/Best Regards

Michael Abel
IBM Certified Advanced Technical Expert - RS/6000 AIX
IBM Certified Specialist - ADSM
=====================================================
res nova Unternehmensberatung GmbH
                   ...aktiv in AIX
MAIL:  Ruppmannstrasse 41
       D-70565 Stuttgart, Germany
FON:   +49 711 78888 0
FAX:   +49 711 78888 99
WWW:   http://www.resnova.de
EMAIL: mailto:Michael.Abel AT resnova DOT de