ADSM-L

Re: Problems with Qualstar TLS-46120

1998-10-17 11:36:46
Subject: Re: Problems with Qualstar TLS-46120
From: Leandro Carneiro Torres <ctorres AT SERVICEINF.COM DOT BR>
Date: Sat, 17 Oct 1998 12:36:46 -0300
Bruce,
when will this ptf2 is available ??
This information is very important to me !

Thanks,
Leandro.


Bruce Huang wrote:

> ===========================================================================
> Folks,
> I have the following environment:
>
> Solaris v.2.5.1
> ADSM Server for Solaris v.3.1.2.0
> Qualstar TLS-46120 with 4 drives SONY SDX-300C
>
> To setup this environment, I executed the following commands:
>
> def library robo libtype=scsi device=/dev/rmt/5lb
> def drive robo drive1 device=/dev/rmt/7mt element=500
> def drive robo drive2 device=/dev/rmt/8mt element=501
> def drive robo drive3 device=/dev/rmt/9mt element=502
> def drive robo drive4 device=/dev/rmt/10mt element=503
> def devclass aitclass devtype=8mm format=aitc library=robo
> mountlimit=drives
>
> Until now, everything works fine.
>
> But, when I execute the command "label libvol robo checkin=scratch
> search=yes labelsource=prompt" and the elevator put the tape inside the
> drive, I receive the following error:
>
> ANR8302E I/O Error on drive DRIVE1 (/dev/rmt/7mt) (OP=SETMODE, CC=207,
> KEY=FF, ASC=FF, ASCQ=FF, SENSE=**NONE**, Description=device is not in a
> state capable of performing request.)
>
> The command don't work.
>
> Anyone can help to solve this problem ???
> =====================================================================
>
> This problem is fixed in PTF2 for V3.1.2.0.  In the meantime, you can use
> dsmlabel instead - the tape label code is there for this device support in
> dsmlabel.
>
> ADSM Sun Server Development
<Prev in Thread] Current Thread [Next in Thread>