STK9714 library, DLT7000, NT4.0 ADSM 3.1.0.2 problem
2015-10-04 17:59:01
We are new to ADSM-land: just now implementing ADSM Server 3.1.0.2 on an
Intel (Pentium II) based server running NT4.0 using an STK9714 library
with 3 DLT7000 drives.
We have a problem: several operations seem to "hang up" and eventually
time out - e.g., sometimes migrating from the disk pool to a tape pool
or moving the data from a tape volume back to the disk pool ("move data
000027 stg=backuppool").
We also get messages:
04/07/1998 10:54:04 ANR8300E I/O error on library DLTLIB (OP=8401C058,
CC=304, KEY=04, ASC=40, ASCQ=02,
SENSE=70.00.04.00.00.00.00.0C.00.00.00.00.40.02.00.00.00.00.00.00.,
Description=Changer failure). Refer to Appendix B in the 'Messages'
manual for recommended action.
04/07/1998 10:54:04 ANR1404W Scratch volume mount request denied - mount
failed.
When I looked in Appendix B, I did not find these ASC/ASCQ values -
perhaps I'm looking at the wrong place?
04/02/1998 15:45:00 ANR8302E I/O error on drive DRIVE1 (MT2.0.0.0)
(OP=READ, CC=205, KEY=FF, ASC=FF, ASCQ=FF, SENSE=**NONE**,
Description=SCSI adapter failure). Refer to Appendix B in the
'Messages' manual for recommended action.
We checked all connections, hardware setup, etc. and found nothing
wrong.
We can use any help or insight you can offer!
Thanks.
Allan Kelly
BC Rail Ltd.
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
- STK9714 library, DLT7000, NT4.0 ADSM 3.1.0.2 problem, Allan Kelly
- Re: STK9714 library, DLT7000, NT4.0 ADSM 3.1.0.2 problem, Kelly J. Lipp
- Re: STK9714 library, DLT7000, NT4.0 ADSM 3.1.0.2 problem, Allan Kelly
- Re: STK9714 library, DLT7000, NT4.0 ADSM 3.1.0.2 problem, Brad Wallace
- Re: STK9714 library, DLT7000, NT4.0 ADSM 3.1.0.2 problem, Allan Kelly
- Re: STK9714 library, DLT7000, NT4.0 ADSM 3.1.0.2 problem, Boireau, Eric (MED-Cap Gemini)
- STK9714 library, DLT7000, NT4.0 ADSM 3.1.0.2 problem,
Allan Kelly [SMTP:KellyJA <=
|
|
|