Hello,
Is it works with Firmware 172D on DLT7000 ?
If not I have to upgrade firmware ? This is a new install !
Thanks !

> g          GE Medical Systems 
> __________________________________
> Eric Boireau                                                GITS
> Unix / NT  System Engineer
> 
> GE Medical Systems S.A
> 283, rue de la Minière 
> 78533 BUC Cedex France
> Tél: (33) 01 30 70 39 51,  DC: 8*644 3951
> Fax: (33) 01 30 70 39 20, DC: 8*644 3920
> mailto:Eric.Boireau AT med.ge DOT com
> 
> Salutations / Best Regards
> 
> 
> ----------
> From:         Louie, James[SMTP:LouieJ AT NABISCO DOT COM]
> Reply To:     ADSM: Dist Stor Manager
> Sent:         mardi 17 mars 1998 18:22
> To:   ADSM-L AT VM.MARIST DOT EDU
> Subject:      DLT7000 end of volume problems solved
> 
> We just solved our problem with ADSM NT , STK 9710, and DLT7000 drives
> marking a tape read-only and putting it into an error state with a
> write
> error whenever it reached the end of a volume.  We upgraded the
> firmware on
> our DLT drives to level 70 and everything works fine now.  NT control
> panel,
> tape drives, properties reports DLT7000 version 1E46.
> 
> Thanks to a previous poster for the advice on obtaining the firmware
> fix.
> 
> James Louie
> Nabisco
>