Sorry i have fogotten to send the Message from the activity log.
The whole system is died. Everytime i must reboot the machine.
I can do a backup/restore from any tape in the define library, but
not a move data from first library to the second libray

The Screen of the Device Detector looks like this:

DiskPeripheral  n/a       Disk  0 0 0 0 Compay Disk Array 1.90
DiskPeripheral  n/a       Disk  1 0 0 0 Compay Disk Array 1.90
DiskPeripheral  n/a       Disk  2 0 0 0 Compay Disk Array 1.90
TapePeripheral  mt3.0.0.1 4mm   3 0 0 1 HP C1553A       9608
MediumChanger   lb3.1.0.1 Libr  3 1 0 1 HP C1553A       9608
TapePeripheral  mt4.0.0.1 4mm   4 0 0 1 HP C1553A       9608
MediumChanger   lb4.1.0.1 Libr  4 1 0 1 HP C1553A       9608
CdRomPeripheral n/a       n/a   5 0 0 1 Compaq crd-254v 1.06


03/04/1998 17:32:21  ANR8302E I/O error on drive DAT_DRIVE1 (MT3.0.0.1)
                      (OP=READ, CC=205, KEY=FF, ASC=FF, ASCQ=FF,
                      Description=SCSI adapter failure).  Refer to
Appendix B
                      in the 'Messages' manual for recommended action.
Kelly J. Lipp wrote:
>
> What message are you getting in the activity log?  Try q actlog to find
> out.  If the server is dying the reason should be in the activity log.
>
> Kelly
>
> -----Original Message-----
> From:   Michael Garnebode [SMTP:michael.garnebode AT westlb DOT de]
> Sent:   Wednesday, March 04, 1998 9:40 AM
> To:     ADSM-L AT VM.MARIST DOT EDU
> Subject:        ADSM-Server 2.1.12 NT with two Librarys (HP12000e)
>
> Hi ADSM,
> i have configure on a NT 4.0 Server a ADSM-Server 2.1.12 with two
> Library with one drive (HP SureStore 12000e) single SCSI card.
> I saw the library and drive configuration in the adsm utilitys tool.
> Hi look ok. Diferent SCSI ID and so on.
> I want to migrate the data from the first library to the second library.
> I define two device classes for every drive and two storagepools.
> The first storage pool migrate the data to the second storage pool.
> Every time when i force the migration process both library load a tape
> do somthing and then the adsm-server dies.
>
> Have anybody a idea or solution ??
>
> thanks michael garnebode