Roger,

  It is a remote possibility that the buffer for the card is not big
enough.  Check it with the CTRL-ALT-INSERT config stuff.  We were running a
machine with 4k and it would not run IP until we increased it.  We moved it
to 64K, I do not know if this is required.

I am assuming you have verfied the route info and netmask.

Good Luck,
  Dan T.

----------
> From: Roger Nadler <Roger_Nadler AT SONYMUSIC DOT COM>
> From: Roger Nadler <Roger_Nadler AT SONYMUSIC DOT COM>
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: ADSM & OS/2 WARP Connect Client
> Date: Friday, October 10, 1997 8:32 AM
>
> We just installed Warp Connect on a OS/2 Server. We use to back the
machine
> up with IPX. Now that we turned on the IP connection, as soon as the box
> starts to backup it looses it's ip connection. The adapter stays bound to
> ip. You can ping your own address but can get nowhere on the wire. I
issued
> the ifconfig up|down command, restart the protocol but nothing happens
> until you recycle the box with a cold boot. Has anyone seen this before