After reading a post here, I tried to configure my 3570-B02.  Everything
was working fine until:
----------------------------------------------------------------------------
---
---
Next you can define the drive to ADSM.
Next you can define the drive to ADSM.
DEFINE DRIVE libname drivename DEVICE=/dev/rmt0,16
The 16 indicates the "slot" that the drive occupies.  Since you have a B11,
I think that only has one drive.  A B12 has two, so for that you'd also
need to do
DEFINE DRIVE libname drivename2 DEVICE=/dev/rmt1,17
You only need to define the library for the first drive.
----------------------------------------------------------------------------
---
---
I'm not sure what the "slot" is.  Any help?
I'm not sure what the "slot" is.  Any help?

Thanks Alan Hamilton for getting me this far!
Frank M. Ramaekers Jr.  Austin Community College     Voice: (512)223-7619
Systems Programmer      5930 Middle Fiskville Rd.    Fax:   (512)483-7664
Information Services    Austin, Texas  78752-4390