Claus,
  The first thing to do is to disable the Sytos driver
in Config.sys.  You cannot have both drivers active
at once.  If that does not work, you should contact
IBM service.

Barry Fruchtman
ADSM Development

On Tue, 30 Jul 1996, Claus Schroeder wrote:

> Hi.
>
> I am trying to setup an Exabyte 8505XL to be used with an ADSM/2
> server. When I try to define the tap with: the "Define Drive.."
> command the server refuses with the message: "ANR8420E DEFINE DRIVE:
> An I/O error occurred while accessing drive..". The return code is 3.
> I have used ADSMSDI to check that the drive is available and can be
> supported. When using Sytos Plus on the same Server the tapedrive
> works fine with Sytos having loaded the sytos driver.
>
> Is there somebody who can help me?
>
> The server is installed with WARP from WARP server and the network
> runs on netbios. I have retrieved IP20545 from the FTP server to be
> sure that the tapedrive is supported.
>
> Thanks in advance
>
> Claus Schroeder
> Hempel Marine Paints A/S
> Lyngby
> Denmark
>