Hi Mike,

This was a problem involving another customer, who had managed to
configure his 7331-205 in dual split mode for sharing between
two machines.

We have now managed to configure the 7331 correctly and all is okay.
Thanks for the advice,

Cheers,  John Newman.


>
>John Newman - In Response
>
>sorry John - I didnt have this problem when I installed mine.
>Obvious Q's are is mt1 defined to the OS
>have U the correct license for 7331-295 support
>are U sure mt1 is working ?
>the command I used to define the library was
>
>define library robot libtype=scsi device=/dev/lb0
>define devclass 7gb8mm  devtype=8mm library=robot format=8500c mountlimit=2 
>estc
>apacity=14g prefix=BSGD
>define drive robot mt0 device=/dev/mt0 element=23
>define drive robot mt1 device=/dev/mt1 element=24
>
>
>|
>| Hi,
>|
>| I have come across a problem with defining a drive to ADSM.
>| The drive is one of 2 in a 7331-205, which are supposed to be
>| defined as elements 23 and 24.
>|
>| The first drive mt0 defines ok in element 23.
>| When defining the second drive (mt1) as element 24 however, I get
>| the following error.
>|
>| ANR8366E DEFINE DRIVE : Invaild value for element parameter.
>|
>| I have tried deleting the library and redefining everything again,
>| but to no avail.
>|
>| Any help would be appreciated,
>|
>| Cheers,  John Newman
>|
>|
>
>Mike McCaffery, Systems Manager,          -Tel   : +44 (0)1565 614546
>Unix Systems Support Team, Barclays Bank, -Fax   : +44 (0)1565 613784
>Radbroke Hall, Knutsford, Cheshire, UK.   -email : Mike.McCaffery AT 
>barclays.co DOT uk
>