Author: Richard van Denzel <RvanDenzel AT SLTNGROUP DOT COM>
Date: Thu, 11 Dec 2003 21:41:58 +0100
To my knowledge (I've done it in the past), you can edit the devconfig file and put in the right (new) device name. Met vriendelijke groet, with kind regards, Richard van Denzel Consultant IBM CATE,
Author: Don Flathau <Don_Flathau AT ACUSHNETGOLF DOT COM>
Date: Thu, 11 Dec 2003 12:48:45 -0800
I have tried that and recreated the library, drives and paths but then the system says that the LB6.0.0.2 is not available. Richard van Denzel To: ADSM-L AT VM.MARIST DOT EDU <RvanDenzel@SLTNG cc: RO
Author: Richard van Denzel <RvanDenzel AT SLTNGROUP DOT COM>
Date: Thu, 11 Dec 2003 21:49:05 +0100
Have you checked you definitions in TSM against those in devcnfg? Met vriendelijke groet, with kind regards, Richard van Denzel Consultant IBM CATE, TSM Certified Consultant _________________________
Author: Don Flathau <Don_Flathau AT ACUSHNETGOLF DOT COM>
Date: Thu, 11 Dec 2003 13:06:28 -0800
I tried to set up the library in TSM the same as before the restore. I deleted the paths then redefined using the same info that's in the devcfg. I can set it up in TSM to look like it did before but
Author: Richard van Denzel <RvanDenzel AT SLTNGROUP DOT COM>
Date: Thu, 11 Dec 2003 22:08:31 +0100
What you should do is this: DEFINE PATH CAADSTAR LB6.0.0.2 SRCTYPE=SERVER DESTTYPE=LIBRARY DEVICE=lb6.0.0.3 ONLINE=YES or do: UPDATE PATH CAADSTAR LB6.0.0.2 DEVICE=lb6.0.0.3 Met vriendelijke groet, w
From the command line, assuming you have AIX, did you run lsdev -Cc tape to see if the devices were defined or available? And cfgmgr -v to configure your tape devices, should they only be defined? I