Author: Pawel Jobkiewicz <pjobkiewicz AT BETACOM.COM DOT PL>
Date: Mon, 9 May 2005 12:54:50 +0200
Hi! I have server 2003 SP1 with TSM 5.3.1.1 and library IBM Ultrium 3583 connected to this server via FC. I've installed drivers to the tapes without any problem, but I can't install correctly meduim
Author: Otto Schakenbos <oschakenbos AT TELEFLEX DOT COM>
Date: Mon, 9 May 2005 13:27:26 +0200
not sure about windows but in linux/unix there is the tsmscsi driver that you use for all library's except IBM library's. If you have a ibm library you need to use a special driver that only works wi
Author: Daniel Sparrman <Daniel.Sparrman AT EXIST DOT SE>
Date: Mon, 9 May 2005 13:31:39 +0200
You will need to install the IBM Atape driver, which you can find here: ftp://ftp.software.ibm.com/storage/devdrvr/. You cannot use the TSM device driver for IBM equipment. Best Regards Daniel Sparrm
Author: Steve Roder <spr AT REXX.ACSU.BUFFALO DOT EDU>
Date: Mon, 9 May 2005 10:01:51 -0400
Hi Pawel, I believe what you need for this is IBMUltrium 5.0.8.0, and it requires your 3583 firmware to be at a minimum level of 5.14.0001. However, for 2003, it may require the newer IBMTape for wi
Author: "Stapleton, Mark" <mark.stapleton AT BERBEE DOT COM>
Date: Mon, 9 May 2005 10:22:22 -0500
This would be true, Daniel, if Pawel were using AIX on his TSM server. However, he commented that he was using Windows... -- Mark Stapleton (stapleton AT berbee DOT com) IBM Certified Advanced Deploy
The TSM device driver should not be used to control IBM libraries since V5.2. If it was an STK library then you would use it but for IBM library you use the medium changer driver that comes with the