Author: "Gordon J. Mills III" <Gordon.Mills AT usa DOT net>
Date: Tue, 10 Jan 2006 14:03:49 -0600
I hope this is not a rerun of a previous topic but I have not found anything on the net yet. I have amanda 2.4.5 running on 2 different servers. The problem started about 5 or 6 weeks after implement
Author: "Freels, James D." <freelsjd AT ornl DOT gov>
Date: Tue, 10 Jan 2006 15:43:56 -0500
Do you happen to be using the aic7xxx driver ? If so, I had the same problem until the new kernel 2.6.15. -- James D. Freels, Ph.D. Oak Ridge National Laboratory freelsjd AT ornl DOT gov http://www.c
Do you happen to be using the aic7xxx driver ? If so, I had the same problem until the new kernel 2.6.15. I'm having problems in debian 2.6.8 related to aic7xxx as well...I use an aic7xxx HVD SCSI c
Author: "Freels, James D." <freelsjd AT ornl DOT gov>
Date: Tue, 10 Jan 2006 16:19:48 -0500
The problem I had started at kernels greater than 2.6.12.x (starting at 2.6.13.0) and was finally cleared at 2.6.15.0. -- James D. Freels, Ph.D. Oak Ridge National Laboratory freelsjd AT ornl DOT gov
Author: "Gordon J. Mills III" <Gordon.Mills AT usa DOT net>
Date: Tue, 10 Jan 2006 20:50:51 -0600
Yes, I am using the aic7xxx driver. I am using the adaptec 39160 card. My tape drive is a dell 112T, basically a 1U unit with 2 DLT 40/80 drives in it. The other server had the same scsi card with Co
Author: Joshua Baker-LePain <jlb17 AT duke DOT edu>
Date: Tue, 10 Jan 2006 23:11:16 -0500 (EST)
Yes, I am using the aic7xxx driver. I am using the adaptec 39160 card. My tape drive is a dell 112T, basically a 1U unit with 2 DLT 40/80 drives in it. The other server had the same scsi card with C
Author: "Stefan G. Weichinger" <sgw AT amanda DOT org>
Date: Wed, 11 Jan 2006 19:30:57 +0100
Interesting ... I am using that module with kernel 2.6.13 and have no problems. Maybe this related to the old hardware I use, maybe to the fact that the Suse-guys have patched that already (assumptio
Author: "Stefan G. Weichinger" <sgw AT amanda DOT org>
Date: Wed, 11 Jan 2006 21:27:06 +0100
The problem I had started at kernels greater than 2.6.12.x (starting at 2.6.13.0) and was finally cleared at 2.6.15.0. Interesting ... I am using that module with kernel 2.6.13 and have no problems.
Author: "Freels, James D." <freelsjd AT ornl DOT gov>
Date: Wed, 11 Jan 2006 16:23:53 -0500
the following text was included in the 2.6.15 kernel changelog The following change was found from the Adaptec developers. Note the "2.6.13+" reference, the word "deadlock", and the final "sign offs"