Hi We are currently we are using Aix 4.3.3 with TSM 5.1.1.8 server, We want to configure TSM 5.2 client on Windows 2000 server. How to see the windows NT device mapping with TSM server ( element mapp
Author: Ian Hobbs <little_brutus AT ROGERS DOT COM>
Date: Sun, 10 Oct 2004 15:24:41 -0400
I've seen that Windows presents the devices as follows mt{target}.0.0.{bus} So mt4.0.0.6 would be scsi target 4 on bus 6. We found for tape on FC with QLogic cards, life was ALOT easier when we used
Author: Bill Boyer <bill.boyer AT VERIZON DOT NET>
Date: Sun, 10 Oct 2004 16:31:09 -0400
Unless you are installing the Storage Agent, why do you care? If you've installed the Storage Agent you can run the TSMDLST.EXE utility to get the MTx.x.x.x -> WWPN mapping. You can then do a 'lscfg
Author: Gordon Woodward <gordon.woodward AT DB DOT COM>
Date: Mon, 11 Oct 2004 09:32:09 +1000
I am not sure if this is what you are after but you can get the element number by running the lbtest.exe utility. The steps are: 1) Start lbtest.exe from dos window 2) Press 1, for Manual Test 3) Pre