Author: Jane Curry <jane.curry AT skills-1st.co DOT uk>
Date: Sat, 20 May 2006 12:51:51 +0100
You will get ping (ICMP) polling by default. If you have specified a range for SNMP polling (using $ in netmon.seed) and then you want a machine from that range ping-polled, then put an entry for thi
Author: "Usman Taokeer" <usman.taokeer AT gmail DOT com>
Date: Sun, 21 May 2006 11:17:12 +0500
Jane, That i know, here is what i want to do. Some of the nodes (non-snmp) i want to ping every 10 Minutes. for status checking, these nodes are acutally servers that do not have SNMP configured. In
What Jane told you is that this is done through the SNMP options dialog. If SNMP is not enabled the devices will be polled by ping ICMP only. Nothing else is required. If devices are shown down when
Author: "Usman Taokeer" <usman.taokeer AT gmail DOT com>
Date: Mon, 22 May 2006 18:17:52 +0500
James, In the SNMP Options i only see the devices that are SNMP enabled. If i manually add a device and do not give the SNMP read/write community string that will be treated as ICMP polled device, ri