- 1. [Networker] Very Slow Backups? (score: 1)
- Author: Tammie Robertson <trobertson AT ALLIEDMACHINE DOT COM>
- Date: Tue, 19 Aug 2003 11:26:48 -0400
- Win2000, Exabyte Mammoth2, Networker 6.1 We were experiencing some hard drive problems so our vendor had us basically replace everything from the drives to the SCSI Card one at a time. Last being the
- /usr/local/webapp/mharc-adsm.org/html/Networker/2003-08/msg00368.html (11,675 bytes)
- 2. Re: [Networker] Very Slow Backups? (score: 1)
- Author: "Fowler, Carter" <CFowler AT LONDON DOT CA>
- Date: Tue, 19 Aug 2003 12:22:45 -0400
- Have you checked the NIC settings on each of the servers / clients involved? Perhaps they are set to auto and should be forced to 100/full. I would recommend checking this as a starting point. Ever t
- /usr/local/webapp/mharc-adsm.org/html/Networker/2003-08/msg00370.html (12,791 bytes)
- 3. Re: [Networker] Very Slow Backups? (score: 1)
- Author: "Maine, Daniel" <DEM AT DELTAFAUCET DOT COM>
- Date: Tue, 19 Aug 2003 12:38:04 -0500
- Usually this is cause by a NIC set for auto on the speed instead of hard-set for full/100 Win2000, Exabyte Mammoth2, Networker 6.1 We were experiencing some hard drive problems so our vendor had us b
- /usr/local/webapp/mharc-adsm.org/html/Networker/2003-08/msg00371.html (12,811 bytes)
- 4. Re: [Networker] Very Slow Backups? (score: 1)
- Author: Oscar Olsson <spam1 AT QBRANCH DOT SE>
- Date: Wed, 20 Aug 2003 02:02:11 +0200
- Or the opposite. Having autoneg enabled on both switch and client is a good idea. That almost always works nowdays. If one experiences interface errors, one could consider setting both switch and cli
- /usr/local/webapp/mharc-adsm.org/html/Networker/2003-08/msg00376.html (11,520 bytes)
This search system is powered by
Namazu