Author: Terrence R Haupt <Terrence.Haupt AT ABBOTT DOT COM>
Date: Tue, 11 Oct 2005 10:17:47 -0500
Morning all, I am sure that this is not a NetWorker problem, but I thought that maybe someone else who is doing disk to disk staging may have run across this or something similar. I have 3 Storage No
Argh. Yeah, I don't see how it could be a networker problem. I've got to assume it's vxfs involved (or something lower level). Have you checked for vxfs patches (or opened a case with Symantec)? --
Author: Terrence R Haupt <Terrence.Haupt AT ABBOTT DOT COM>
Date: Tue, 11 Oct 2005 12:45:57 -0500
I have not opened a case yet, I was trying to figure this out first. I have our storage team looking at the EVA's to see if there is an issue there as well. Terrence R. Haupt SR UNIX Systems Administ
Make sure your EVA has current firmware. I had issues with older model (ESA) HP raid array gear and large file systems. Did the controller firmware upgrade and problems went away. This was Tru64 and
Author: Dave Gold - News <dave2 AT CAMBRIDGECOMPUTER DOT COM>
Date: Sun, 14 Aug 2005 09:51:40 -0400
Hi, CDL looks just like a tape library...sure you can stage from one tape library to another. Set up a stage policy to monitor the pool that is being used on the CDL, and point it to another pool tha
Author: Librado Pamintuan <LPAMINTU AT REGINA DOT CA>
Date: Thu, 2 Oct 2003 08:39:07 -0600
Hello all, I'm trying to use staging on our backups and my goal is just to keep a steady cache of data to get it streaming to 6 DLT 7000 tape drives. I was able to setup the staging device but my que
Author: Librado Pamintuan <LPAMINTU AT REGINA DOT CA>
Date: Wed, 15 Oct 2003 13:52:25 -0600
Hello All, I'm trying to use staging to get higher throughput on our backups, unfortunately I have a limited disk space to use, about 40 Gb and one of our client is 250 Gb in size. So I want staging
Author: "Eidler, Dean" <dean.eidler AT AGRESEARCH.CO DOT NZ>
Date: Thu, 16 Oct 2003 10:42:52 +1300
Hi I think the high water mark in the configuration of staging is what you ae looking for. In the context you describe you are going to write client data to the backup server and then stage that? I t
Author: Kenneth Larsen <Kenneth.Larsen AT STERIA DOT DK>
Date: Thu, 16 Oct 2003 14:09:44 +0200
You can only stage complete savesets, so if your client takes 250GB space you need at least that on your staging device. I use a similar setup for my backups but I only send the incrementals to the d
Solaris 2.8 Networker 6.1.1 When using more than 1 filesystem for staging do they all need to be the same size? Rob Legate 780-493-2625 780 498-6540 cell -- Note: To sign off this list, send a "signo
Author: "Thomas, Calvin" <calvin.thomas AT NACALOGISTICS DOT COM>
Date: Wed, 4 Dec 2002 12:42:00 -0800
No. Calvin Thomas UNIX System Administrator NACA Logistics Solaris 2.8 Networker 6.1.1 When using more than 1 filesystem for staging do they all need to be the same size? Rob Legate 780-493-2625 780