Author: David Ehresman <david.ehresman AT LOUISVILLE DOT EDU>
Date: Mon, 5 Jan 2015 12:51:45 +0000
Here is a script that I picked up at SHARE years ago that lists PRIVATE tapes that are not in fact in use: tsm: ULTSM>q script q_lost_tapes f=l Name Line Command Number -- -- -- Q_LOST_TA- 10 select
Hello. We are using TSM manager 6.3.3.0. Tape Library is a DS3512. I'm trying to check in some brand new tapes (LTO Ultrium 1.5TB). On the DS3512, I choos the library and insert the tape into the mac
Author: "Schneider, Jim" <jschneider AT USSCO DOT COM>
Date: Tue, 23 Dec 2014 14:45:22 +0000
Did you check maxscratch for that storage pool? Hello. We are using TSM manager 6.3.3.0. Tape Library is a DS3512. I'm trying to check in some brand new tapes (LTO Ultrium 1.5TB). On the DS3512, I ch
Did you check maxscratch for that storage pool? he didn't add volumes to library Try set status=private ( stupid advice but may be help you) label libv xxxxxx search=yes checkin=private labels=b over
Author: "Huebner, Andy" <andy.huebner AT NOVARTIS DOT COM>
Date: Tue, 23 Dec 2014 15:37:19 +0000
Below is the command I use on my virtual L180 libraries which are SCSI libraries. I think the difference is the volume range. I do not know the library you have, but some libraries are partitioned an
Hello. hhmmm. I tried status=private. Results were the same. I tried: label libv xxxxxx search=yes checkin=scratch labels=b volr=A00560L5,A00561L5 same results. Also, the maxscr on all our copy pools
Author: "Baker, Jane" <Jane.Baker AT CLARKS DOT COM>
Date: Tue, 23 Dec 2014 17:00:46 +0000
If the maxscratch was incorrect surely the activity log would indicate that on the output. Can the library through the library GUI see the barcodes of the tapes, could be the cartridge assignment pol
Author: "Huebner, Andy" <andy.huebner AT NOVARTIS DOT COM>
Date: Tue, 23 Dec 2014 17:02:00 +0000
q libv LIBRARY will show all of the tapes in the library. If your tape pools use tapes from scratch then look for a tape that is private with no last use. These are sometimes orphaned tapes. You can
Previously stated in the email. (I typed status=bulk...but meant search=bulk) I have tried search=bulk in the past, on a tape I had issues with earlier in the year, but that tape is just sitting in t
Hello. The library. I put tape on the door (the i/o hopper...ours holds 6 tapes) of the DS3512, closed the hopper, then using the little gui on the DS3512, I choose the library I want them checked in
As an option you can use the search=bulk, and the troublesome tape once checked into the library can be updated with upd v XXXX access=unav But your are correct Jeanne, the search=yes should have pic
Hello. Yes I have one tape as described below. Private with no last use. And does not show up with a q drm. What's the command to re-label the tape? q libv LIBRARY will show all of the tapes in the l
Author: George Huebschman <george.huebschman AT PNC DOT COM>
Date: Tue, 23 Dec 2014 13:39:42 -0500
You could first try updating the status to scratch. It could be that the volume had a mount or write failure. That could be due to media error or tape drive error. If the tape is unlabeled or damaged
Author: "Huebner, Andy" <andy.huebner AT NOVARTIS DOT COM>
Date: Tue, 23 Dec 2014 18:54:58 +0000
Add overwrite=yes As I said before, this WILL delete any data on the tape. Use with caution. Andy Huebner Hello. Yes I have one tape as described below. Private with no last use. And does not show up
I think that worked. Thank you. I still can't check in any brand new tapes. I have another tape, that when I did the checkin, I got this message (this is NOT the brand new tape or the orphaned tape I
If the tape in question A00025L5 is part of your offsite pool, it just needs to be checked out of the library and sent offsite until ready to come back. If that tape is part of an internal pool. You
It's telling me Vol A00025L5 is already present in library xxxxx. I don't believe there is a label range. I've looked on the devc and stgpool. Where can I look to see if there's a range defined? If t