The control panel on our TS3500 reports library full with 1408 volumes. 4 are cleaning cartridges, so there should be 1404 volumes in TSM. But Select count(volume_name) from libvolumes Returns 1381,
Also, make sure you have run a CHECKIN with search=yes and another with search=BULK. select * from libvolumes shows the volumes that have been checked in, not necessarily all the volumes in the physi
Yes, but only 2 years after the library was first installed. Fred Johanson TSM Administrator University of Chicago 773-702-8464 Do you have ALMS turned on?
Since we upgraded the drives this summer, we always use Label libv capeklib1 search=bulk checkin=scratch ... Fred Johanson TSM Administrator University of Chicago 773-702-8464 Also, make sure you hav
Author: "Cowen, Richard" <rcowen AT SBSPLANET DOT COM>
Date: Fri, 7 Nov 2008 13:26:09 -0500
You can try retrieving info via SNMP. I have used oid's starting with 1.3.6.1.4.1.2.6.182. Slots were oid's 1.3.6.1.4.1.2.6.182.3.7.2.1.11.nnn, with the barcode returned as the value. You may need to
Author: Thomas Denier <Thomas.Denier AT JEFFERSONHOSPITAL DOT ORG>
Date: Fri, 7 Nov 2008 13:59:47 -0500
--Fred Johanson wrote: -- My site has a 3494, but we will have to work with a 3584 or TS3500 at our next disaster recovery test. One of the Web sites I found while researching 3584 behavior indicates
You can also try the show slots <lib-name> and show library <lib-name> from the TSM server. Compare what TSM thinks is in the library with what is really in the library. In my experience, if you've u
Thanks all for your suggestions. The last time we asked the CE about missing tapes was June, after an incident where 11 returns from offsite disappeared into the robot. Since then we've upgraded driv