adsm04
ADSM.ORG Member
How to get wwpn details of HBA used for tape drives on windows 2000 server?
-
-
Community Tip: Forum Rules (PLEASE CLICK HERE TO READ BEFORE POSTING)
Click the link above to access ADSM.ORG Acceptable Use Policy and forum rules which should be observed when using this website. Violators may be banned from this website. This notice will disappear after you have made at least 3 posts.
wwpn details
- Thread starter adsm04
- Start date
DanGiles
ADSM.ORG Senior Member
It's been a while since this was posted: did you get it solved? There should be a utility that was installed with the HBA driver that should give you all this information.
heada
ADSM.ORG Moderator
Are you looking for the WWPN (World Wide Port Name) of the HBA in the Win2000 server or of the tape drives that the server has zoned to it? If you are looking for the WWPN of the HBA in the server, there should be a tool as part of the HBA drivers -or- you can get it from the SAN connectivity devices themselves (switches, directors, etc) If you're looking for the data for the tape drives, you would need to look at the drive physically (many have an LCD read out that lists that data) or look at the connectivity devices (switches, directors, etc) and the zoning.
-Aaron
-Aaron
adsm04
ADSM.ORG Member
Thanks Dan and Heada....yeah i figured out it has SDD. Thru command line c:\program files\IBM\SDD datapath query device will give the details. Thanks for ur help.
