1. Forum Rules (PLEASE CLICK HERE TO READ BEFORE POSTING) Click the link to access ADSM.ORG Acceptable Use Policy and forum rules which should be observed when using this website. Violators may be banned from this website. This message will disappear after you have made at least 12 posts. Thank you for your cooperation.

Virtual tape eject using TS3500

Discussion in 'TSM Installation, Upgrade and Configuration' started by redmerlin, Oct 13, 2008.

  1. redmerlin

    redmerlin New Member

    Joined:
    Feb 1, 2008
    Messages:
    15
    Likes Received:
    0
    Location:
    Madison, WI
    Can anyone tell me if it's possible to setup TSM so it won't actually eject volumes out of the library but instead just mark them as ejected in the library? We have a remote DR Data Center that is unstaffed and I don't want the I/O slot to fill up but instead have plenty of available slost in the library to use. The library is an IBM TS3500 running TSM 5.5.1 on AIX.
     
  2.  
  3. GregE

    GregE Senior Member

    Joined:
    May 12, 2006
    Messages:
    2,100
    Likes Received:
    31
    help CHECKOUT LIBVOLUME

    If you mean remove them from TSM's libvol list, use "remove=no" in your CHECKOUT LIBVOL command.
     
    Last edited: Oct 13, 2008
  4. redmerlin

    redmerlin New Member

    Joined:
    Feb 1, 2008
    Messages:
    15
    Likes Received:
    0
    Location:
    Madison, WI
    Thanks!

    Worked great, thanks GregE
     

Share This Page