TSM Server - DRM Issue

[JohnnyK]

Dear friends,

Please could you help me to resolve a tsm issue, i have the following messages in the daily report and want any help / steps to resolve it :

ANR1410W Access mode for volume A00125L4 now set to "unavailable".

ANR1081E Space reclamation is ended for volume A00125L4. Storage media is inaccessible.

ANR1163W Offsite volume A00130L4 still contains files which could not be moved.

ANR1086E Space reclamation is ended for volume A00099L4. There is insufficient space in storage pool.

Thank's a lot.

Best regards.

 

[fuzzballer]

This is a good place to start. http://publib.boulder.ibm.com/infocenter/tsminfo/v6/index.jsp

 

[Jacob_6]

Search the activity log, is the volume throwing errors?

If it doesn't show update it available and see what happens:

upd vol <vol_name> acc=readw

If the volume continues to throw errors you may have to rebuild it from the copy pool.

http://www-01.ibm.com/support/docview.wss?uid=swg21219227

 

[dms19]

run a q vol volumename f=d and see if there are read or write errors. If there are more than 4 of either I typically run an audit on it. As noted by Jacob checking the act log for errors is a good start too. There may have been a drive issue related to the unavailable.

 

[ChrisRees]

Hi,

I think you may have two problems here... firstly with the A00125L4 volume and also I think your stgpool is full going by ANR1086E

check what you stgpool has set for maxscratch. try this
select stgpool_name,maxscratch,numscratchused from stgpools

If you have reached the limit for the stgpool, and you have scratch tapes available, increase the maxscratch parameter for the stgpool..

Hope that helps..