TDP 8.1.6 for HANA

Bharanij

Bharanij

ADSM.ORG Member
Joined
Jun 18, 2016
Messages
159
Reaction score
2
Points
0
Iam getting error msg when i try to install on sp12 p3

proserver:/opt/tivoli/tsm/tdp_hana # ./setup.sh

IBM Spectrum Protect for Enterprise Resource Planning
Data Protection for SAP HANA(R)
Version 8.1.6.0 build 752
(c) Copyright IBM Corporation, 2011-2018, All Rights Reserved.

Please enter the SAP HANA(R) system ID [NHQ]:
Please enter instance number [20]:
Enter the name of the database user with System Privileges INIFILE ADMIN, CATALOG READ, SERVICE ADMIN and DATABASE ADMIN [SYSTEM]:
Please enter password of database user 'SYSTEM':

Checking node npidbfodevqas
SSH connection OK
Checking temporary space OK
Check for IBM Spectrum Protect API OK - found TIVsm-API64-8.1.6-0.ppc64le
Existing installation detected: TIV-TSMERP-HANA-8.1.6.0-0.ppc64le

Pre-installation checks completed successfully. Press enter to start installation.

Skipping installation on node dbfodevqas
Existing configuration files in /usr/sap/NHQ/SYS/global/hdb/opt/hdbconfig will be reused.

Creating/updating keystore entries ...
Setting key "TSM" in the hdbuserstore on host dbfodevqas.

Do you want to re-enter the passwords for all IBM Spectrum Protect nodes now? [y/n] n

Removing old link "/usr/sap/NHQ/SYS/global/hdb/opt/hdbbackint"
Creating link '/usr/sap/NHQ/SYS/global/hdb/opt/hdbbackint' -> '/opt/tivoli/tsm/tdp_hana/hdbbackint'


Changed the following configuration parameter in global.ini in section [backup]:
log_backup_parameter_file = /usr/sap/NHQ/SYS/global/hdb/opt/hdbconfig/initNHQ.utl
catalog_backup_parameter_file = /usr/sap/NHQ/SYS/global/hdb/opt/hdbconfig/initNHQ.utl
data_backup_parameter_file = /usr/sap/NHQ/SYS/global/hdb/opt/hdbconfig/initNHQ.utl
log_backup_using_backint = true
catalog_backup_using_backint = true
parallel_data_backup_backint_channels = 2


Activated the configuration changes successfully.

Tenant databases detected ...
The following tenant databases were found: NHD NHQ

Do you want to create dedicated configuration profiles for your tenant databases with IBM Spectrum Protect for ERP Data Protection for SAP HANA(R)? [y/n] y

Do you want to configure IBM Spectrum Protect for ERP Data Protection for SAP HANA(R) to protect the tenant database NHD? [y/n] y


Starting configuration for tenant database NHD ...
Existing configuration files in /usr/sap/NHQ/SYS/global/hdb/opt/hdbconfig will be reused.
Do you want to re-enter the passwords for all IBM Spectrum Protect nodes now? [y/n] n

Changed the following configuration parameter in global.ini in layer 'DATABASE, NHD' section [backup]:
log_backup_parameter_file = /usr/sap/NHQ/SYS/global/hdb/opt/hdbconfig/initNHD.utl
catalog_backup_parameter_file = /usr/sap/NHQ/SYS/global/hdb/opt/hdbconfig/initNHD.utl
data_backup_parameter_file = /usr/sap/NHQ/SYS/global/hdb/opt/hdbconfig/initNHD.utl
log_backup_using_backint = true
catalog_backup_using_backint = true
parallel_data_backup_backint_channels = 2


Configuration changes for tenant database NHD must be activated MANUALLY
either by restarting the tenant database or by using the
SQL statement 'ALTER SYSTEM RECONFIGURE SERVICE'.

Press enter to continue


Do you want to configure IBM Spectrum Protect for ERP Data Protection for SAP HANA(R) to protect the tenant database NHQ? [y/n] y


Starting configuration for tenant database NHQ ...
Existing configuration files in /usr/sap/NHQ/SYS/global/hdb/opt/hdbconfig will be reused.
Do you want to re-enter the passwords for all IBM Spectrum Protect nodes now? [y/n] y

IBM Spectrum Protect for Enterprise Resource Planning

Data Protection for SAP HANA(R)


- Version 8, Release 1, Modification 6.0 for Linux on POWER 64-bit -
Build: 752 compiled on Jun 20 2018

Licensed Materials - Property of IBM.
(c) Copyright IBM Corporation 1996, 2018 All Rights Reserved.

#SOFTWAREID "backint 1.05" "IBM Spectrum Protect for Enterprise Resource Planning - Data Protection for SAP HANA(R) 8.1.6.0"
BKI5014E: IBM Spectrum Protect Error:
ANS1087E (RC106) Access to the specified file or directory is denied

BKI0020I: End of program at: Fri 30 Nov 2018 03:33:28 PM IST.
BKI0021I: Elapsed time: 01 sec.
BKI0024I: Return code is: 2.

Failed to set the password for the IBM Spectrum Protect node(s). Please check the output above,
correct the error and re-run the command.
 
Bharanij said:
Iam getting error msg when i try to install on sp12 p3

proserver:/opt/tivoli/tsm/tdp_hana # ./setup.sh

IBM Spectrum Protect for Enterprise Resource Planning
Data Protection for SAP HANA(R)
Version 8.1.6.0 build 752
(c) Copyright IBM Corporation, 2011-2018, All Rights Reserved.

Please enter the SAP HANA(R) system ID [NHQ]:
Please enter instance number [20]:
Enter the name of the database user with System Privileges INIFILE ADMIN, CATALOG READ, SERVICE ADMIN and DATABASE ADMIN [SYSTEM]:
Please enter password of database user 'SYSTEM':

Checking node npidbfodevqas
SSH connection OK
Checking temporary space OK
Check for IBM Spectrum Protect API OK - found TIVsm-API64-8.1.6-0.ppc64le
Existing installation detected: TIV-TSMERP-HANA-8.1.6.0-0.ppc64le

Pre-installation checks completed successfully. Press enter to start installation.

Skipping installation on node dbfodevqas
Existing configuration files in /usr/sap/NHQ/SYS/global/hdb/opt/hdbconfig will be reused.

Creating/updating keystore entries ...
Setting key "TSM" in the hdbuserstore on host dbfodevqas.

Do you want to re-enter the passwords for all IBM Spectrum Protect nodes now? [y/n] n

Removing old link "/usr/sap/NHQ/SYS/global/hdb/opt/hdbbackint"
Creating link '/usr/sap/NHQ/SYS/global/hdb/opt/hdbbackint' -> '/opt/tivoli/tsm/tdp_hana/hdbbackint'


Changed the following configuration parameter in global.ini in section [backup]:
log_backup_parameter_file = /usr/sap/NHQ/SYS/global/hdb/opt/hdbconfig/initNHQ.utl
catalog_backup_parameter_file = /usr/sap/NHQ/SYS/global/hdb/opt/hdbconfig/initNHQ.utl
data_backup_parameter_file = /usr/sap/NHQ/SYS/global/hdb/opt/hdbconfig/initNHQ.utl
log_backup_using_backint = true
catalog_backup_using_backint = true
parallel_data_backup_backint_channels = 2


Activated the configuration changes successfully.

Tenant databases detected ...
The following tenant databases were found: NHD NHQ

Do you want to create dedicated configuration profiles for your tenant databases with IBM Spectrum Protect for ERP Data Protection for SAP HANA(R)? [y/n] y

Do you want to configure IBM Spectrum Protect for ERP Data Protection for SAP HANA(R) to protect the tenant database NHD? [y/n] y


Starting configuration for tenant database NHD ...
Existing configuration files in /usr/sap/NHQ/SYS/global/hdb/opt/hdbconfig will be reused.
Do you want to re-enter the passwords for all IBM Spectrum Protect nodes now? [y/n] n

Changed the following configuration parameter in global.ini in layer 'DATABASE, NHD' section [backup]:
log_backup_parameter_file = /usr/sap/NHQ/SYS/global/hdb/opt/hdbconfig/initNHD.utl
catalog_backup_parameter_file = /usr/sap/NHQ/SYS/global/hdb/opt/hdbconfig/initNHD.utl
data_backup_parameter_file = /usr/sap/NHQ/SYS/global/hdb/opt/hdbconfig/initNHD.utl
log_backup_using_backint = true
catalog_backup_using_backint = true
parallel_data_backup_backint_channels = 2


Configuration changes for tenant database NHD must be activated MANUALLY
either by restarting the tenant database or by using the
SQL statement 'ALTER SYSTEM RECONFIGURE SERVICE'.

Press enter to continue


Do you want to configure IBM Spectrum Protect for ERP Data Protection for SAP HANA(R) to protect the tenant database NHQ? [y/n] y


Starting configuration for tenant database NHQ ...
Existing configuration files in /usr/sap/NHQ/SYS/global/hdb/opt/hdbconfig will be reused.
Do you want to re-enter the passwords for all IBM Spectrum Protect nodes now? [y/n] y

IBM Spectrum Protect for Enterprise Resource Planning

Data Protection for SAP HANA(R)


- Version 8, Release 1, Modification 6.0 for Linux on POWER 64-bit -
Build: 752 compiled on Jun 20 2018

Licensed Materials - Property of IBM.
(c) Copyright IBM Corporation 1996, 2018 All Rights Reserved.

#SOFTWAREID "backint 1.05" "IBM Spectrum Protect for Enterprise Resource Planning - Data Protection for SAP HANA(R) 8.1.6.0"
BKI5014E: IBM Spectrum Protect Error:
ANS1087E (RC106) Access to the specified file or directory is denied

BKI0020I: End of program at: Fri 30 Nov 2018 03:33:28 PM IST.
BKI0021I: Elapsed time: 01 sec.
BKI0024I: Return code is: 2.

Failed to set the password for the IBM Spectrum Protect node(s). Please check the output above,
correct the error and re-run the command.
Click to expand...


Basically it's looking for write permission on the Errorlogname (usually dsmerror.log ).
So give rwx permission for others and retry your setup
 
You must log in or register to reply here.

Data Privacy Impact Assessment

Compliance Assurance in Every Byte: Discover the Impact of Our DPIA Services.

Sponsor ADSM.ORG

If you are reading this, so are your potential customer. Advertise at ADSM.ORG right now.

Navigation Menu

Forums
   IBM TSM
   EMC Backup and Recovery
   Symantec NetBackup  
   SAN  
   NAS
   Platforms / OS
Mailing List Archives
   ADSM-L
User Groups

NordVPN 3 Months FREE

Help Support ADSM.ORG and Get NordVPN with 64% Off and 3 Months FREE.

NordVPN with 64% off + 3 months FREE

Forum statistics

Threads
31,968
Messages
135,431
Members
21,947
Latest member
dylbrawn
Back
Top