AndyRH
ADSM.ORG Senior Member
I have noticed that my TSM server will sometimes choose scratch tapes over tapes that are in the filling state. For example, there are 5 tapes that are not full (10% - 80%), but when migration started TSM grabbed two scratch tapes. When I have seen this before I moved the data off the tapes and all was normal again. There are no errors on the tapes and I see nothing unusual. I know this is not very important, but any clues, or is it just a weirdness?
Other info:
No tapes were mounted at the start of migration.
The tapes in question are in the library.
TSM Version 5, Release 1, Level 1.6
Volume Name: T00572
Storage Pool Name: FS_TAPE
Device Class Name: 3590-A
Estimated Capacity (MB): 40,000.0
Pct Util: 10.7
Volume Status: Filling
Access: Read/Write
Pct. Reclaimable Space: 0.0
Scratch Volume?: Yes
In Error State?: No
Number of Writable Sides: 1
Number of Times Mounted: 15
Write Pass Number: 1
Approx. Date Last Written: 01/11/03 01:28:55
Approx. Date Last Read: 01/11/03 07:00:00
Date Became Pending:
Number of Write Errors: 0
Number of Read Errors: 0
Volume Location:
Last Update by (administrator):
Last Update Date/Time: 01/11/03 00:28:09
Other info:
No tapes were mounted at the start of migration.
The tapes in question are in the library.
TSM Version 5, Release 1, Level 1.6
Volume Name: T00572
Storage Pool Name: FS_TAPE
Device Class Name: 3590-A
Estimated Capacity (MB): 40,000.0
Pct Util: 10.7
Volume Status: Filling
Access: Read/Write
Pct. Reclaimable Space: 0.0
Scratch Volume?: Yes
In Error State?: No
Number of Writable Sides: 1
Number of Times Mounted: 15
Write Pass Number: 1
Approx. Date Last Written: 01/11/03 01:28:55
Approx. Date Last Read: 01/11/03 07:00:00
Date Became Pending:
Number of Write Errors: 0
Number of Read Errors: 0
Volume Location:
Last Update by (administrator):
Last Update Date/Time: 01/11/03 00:28:09