reuse VAULT tapes

xefil

ADSM.ORG Member
Joined
Nov 3, 2005
Messages
46
Reaction score
0
Points
0
Website
Visit site
PREDATAR Control23

Hi to all!

I've set up a maintenance_plan on TSM (with ISC) that creates copy storage pool and use MOVE DRM to move these volumes offsite. That was a mistrake (for now :))
I'll implement DRM later, first have to understood very well the steps. Meanwhile, I've corrected the maintenance_plan and would have back as scratch the tapes of last night. The tapes were in "COURIER" state and then, after executing a "move drmedia * wherestate=courier" they are all to vault:

tsm: TSM-SERVER>q drm

Volume Name State Last Update Automated
Date/Time LibName
---------------- ----------------- ------------------- ----------------
677AEVL2 Vault 02/26/2009 14:49:18
QAJ325L2 Vault 02/26/2009 14:49:18
QAJ326L2 Vault 02/26/2009 14:49:18
QAJ339L2 Vault 02/26/2009 14:49:18
QAJ340L2 Vault 02/26/2009 14:49:18
QAJ341L2 Vault 02/26/2009 14:49:18
QAJ342L2 Vault 02/26/2009 14:49:18
QAJ343L2 Vault 02/26/2009 14:49:18
QAJ344L2 Vault 02/26/2009 14:49:18
QAJ346L2 Vault 02/26/2009 14:49:18

How can I delete this dsm-set and reuse these tapes as scratch?
I have one TSM SERVER (5.4.1) with two LTO 3582 (one SCSI and one FC)
Mi prupose at the moment is to have all on TSM (disk and tape SCSI) and have some copy storage pool on second Library in FC, also without implement any DRM. This step will come in the future.

I would prevent to make mistrakes, also ask the community :)
Thank's a lot for your help!

Simon
 
Top