Query Session output missing client name for some sessions

[obarrmg]

Has anybody seen this before? SHOW SESSION [session#] command also does not have a node name for the session, and I don't see anything in the actlog about the session either.

tsm: TSMSERVER>q se

Sess Comm. Sess Wait Bytes Bytes Sess Platform Client Name
Number Method State Time Sent Recvd Type
------ ------ ------ ------ ------- ------- ----- -------- --------------------
22,318 Tcp/Ip IdleW 2.6 H 18.7 K 1.5 K Node WinNT NODE1
22,322 Tcp/Ip RecvW 0 S 2.2 K 375.8 G Node WinNT NODE1
22,455 Tcp/Ip IdleW 2.0 H 63.9 K 770 Node WinNT NODE 2
22,456 Tcp/Ip RecvW 0 S 1.6 K 577.1 G Node WinNT NODE 2
22,495 Tcp/Ip IdleW 49.6 M 8.7 K 1.5 K Node WinNT NODE1
22,497 Tcp/Ip RecvW 0 S 1.4 K 195.2 G Node WinNT NODE1
22,504 Tcp/Ip RecvW 0 S 1.4 K 192.9 G Node WinNT NODE1
22,512 Tcp/Ip RecvW 0 S 1.4 K 189.6 G Node WinNT NODE1
22,559 Tcp/Ip IdleW 1.1 H 9.1 K 473 Admin AIX Admin 2
22,606 Tcp/Ip IdleW 1.6 M 15.0 M 3.3 K Node WinNT NODE 3
22,615 Tcp/Ip RecvW 0 S 3.0 K 201.2 G Node WinNT NODE 3
23,510 Tcp/Ip IdleW 23.5 M 0 0 Node <<< No client name
23,545 Tcp/Ip IdleW 3.4 M 0 0 Node <<< No client name
23,550 Tcp/Ip Run 0 S 9.7 K 259 Admin AIX Admin 1

Thanks,

 

[marclant]

When you search the actlog for the session, omit the comma, example:

q ac search=23545

If it's been a while, you might need to use begindate and begintime to expand the search.

 

[Trident]

I think those are like telnet connections. Typically from nagios and other monitoring systems.

 

[LED888]

FYI for those that are still running the old TSM Server 5.5, 6.1, 6.2 and 6.3.
TSM Server that are at, and in between, code levels 5.5 and 6.3. There is a known issue where the SHOW SESSION will crash the server.

IC82490: SERVER CRASHES WHEN USING THE SHOW SESSION COMMAND

-Sias