Problems with REMOTE tape

[obiwan2]

Hi,

i have one filling-tape with following details:

Volume Name: 601011L5
Storage Pool Name: CP-D
Device Class Name: DCP2D
Estimated Capacity: 2.9 T
Scaled Capacity Applied:
Pct Util: 0.1
Volume Status: Filling
Access: Read/Write
Pct. Reclaimable Space: 0.9
Scratch Volume?: Yes
In Error State?: No
Number of Writable Sides: 1
Number of Times Mounted: 955
Write Pass Number: 1
Approx. Date Last Written: 05/13/2018 10:43:32
Approx. Date Last Read: 06/19/2016 16:36:00
Date Became Pending:
Number of Write Errors: 0
Number of Read Errors: 0
Volume Location:
Volume is MVS Lanfree Capable : No
Last Update by (administrator): xxxxxxxxxxxxxxxxxxxxxxx
Last Update Date/Time: 06/04/2018 10:48:32
Begin Reclaim Period:
End Reclaim Period:
Drive Encryption Key Manager: None
Logical Block Protected: No

I found this tape with state=unavailable in TSM. After setting the state to "readwrite" and trying to do a "move data 601011L5" nothing happens.... the library is waiting for the tape:

-------- -------------------- -------------------------------------------------
Volume 601011L5 (storage pool CP-D), Target Pool
CP-D, Moved Files: 0, Moved Bytes: 0 bytes,
Deduplicated Bytes: 0 bytes, Unreadable Files:
0, Unreadable Bytes: 0 bytes. Current Physical
File (bytes): 8,570 KB Waiting for mount of
input volume 601011L5 (1253 seconds). Current
output volume(s): 502722L6.

After checking the libvolumes I can see that there is not ape with label 601011L5 within the library.
I can show the contents of the tape without a problem....but where is the tape ????? I can't remember where I have seen a type of REMOTE assigned to this tape....

What can I do to get normal access to this tape ?

Thanks in advance

Hubert

 

[obiwan2]

Problem solved...tape found in external safe ! Thread can be closed !!