Hi I am not sure if i have done it write or wrong.
Jukebox PCE TAPE LIBRARY LTO4: (Ready to accept commands)
slot volume used pool barcode volume id recyclable
1: A00061L4 100% PCE ALGERIA A00061L4 4276829191 no
2: A00062L4 0% PCE ALGERIA A00062L4 4243280935 no
3: A00063L4 full PCE ALGERIA A00063L4 1172398277 no
4: A00064L4 0% PCE ALGERIA A00064L4 3991629057 no
5: A00065L4 0% PCE ALGERIA A00065L4 4226506517 no
6: A00066L4 0% PCE ALGERIA A00066L4 4209729475 no
7: A00067L4 0% PCE ALGERIA A00067L4 4192952405 no
8: A00068L4 0% PCE ALGERIA A00068L4 4176175310 no
9: A00069L4 0% PCE ALGERIA A00069L4 4159398210 no
10: A00053L4 full PCE ALGERIA A00053L4 2396430766 no
11:
12: A00073L4 0% PCE ALGERIA A00073L4 4008405769 no
13: A00072L4 full PCE ALGERIA A00072L4 3521022385 no
14: A00071L4 0% PCE ALGERIA A00071L4 4142621514 no
15: A00070L4 0% PCE ALGERIA A00070L4 4125844450 no
16: A00077L4 0% PCE ALGERIA A00077L4 4109067355 no
17: A00076L4 0% PCE ALGERIA A00076L4 4092290582 no
18: A00075L4 0% PCE ALGERIA A00075L4 4075513476 no
19: A00074L4 0% PCE ALGERIA A00074L4 4058736401 no
20:
21: A00079L4 0% PCE ALGERIA A00079L4 4041959874 no
22: A00078L4 0% PCE ALGERIA A00078L4 4025182792 no
23: -* CLNU25L1 -
*not registered in the NetWorker media data base
20 registered volume(s), 17 volumes are less than 80% full.
17 TB estimated capacity, 13 TB remaining (22% full)
drive 1 (/dev/nst0) slot : A00061L4(mounted)
In Gui i have changed the tapes were showing write protected. i have deleted the data and made them as appendable by running in cmd prompt. ( nsrjb -Lv -b "PCE ALGERIA" -R -S x(x =all above slots)). I was wondering does it pick up next tape automatically and when i check the output it still shows that same tape been mounted. Does it go to next tape automatically?
As i am new to networker and havent got a clue about how it works.
Any help will be great
Thanks,
Jukebox PCE TAPE LIBRARY LTO4: (Ready to accept commands)
slot volume used pool barcode volume id recyclable
1: A00061L4 100% PCE ALGERIA A00061L4 4276829191 no
2: A00062L4 0% PCE ALGERIA A00062L4 4243280935 no
3: A00063L4 full PCE ALGERIA A00063L4 1172398277 no
4: A00064L4 0% PCE ALGERIA A00064L4 3991629057 no
5: A00065L4 0% PCE ALGERIA A00065L4 4226506517 no
6: A00066L4 0% PCE ALGERIA A00066L4 4209729475 no
7: A00067L4 0% PCE ALGERIA A00067L4 4192952405 no
8: A00068L4 0% PCE ALGERIA A00068L4 4176175310 no
9: A00069L4 0% PCE ALGERIA A00069L4 4159398210 no
10: A00053L4 full PCE ALGERIA A00053L4 2396430766 no
11:
12: A00073L4 0% PCE ALGERIA A00073L4 4008405769 no
13: A00072L4 full PCE ALGERIA A00072L4 3521022385 no
14: A00071L4 0% PCE ALGERIA A00071L4 4142621514 no
15: A00070L4 0% PCE ALGERIA A00070L4 4125844450 no
16: A00077L4 0% PCE ALGERIA A00077L4 4109067355 no
17: A00076L4 0% PCE ALGERIA A00076L4 4092290582 no
18: A00075L4 0% PCE ALGERIA A00075L4 4075513476 no
19: A00074L4 0% PCE ALGERIA A00074L4 4058736401 no
20:
21: A00079L4 0% PCE ALGERIA A00079L4 4041959874 no
22: A00078L4 0% PCE ALGERIA A00078L4 4025182792 no
23: -* CLNU25L1 -
*not registered in the NetWorker media data base
20 registered volume(s), 17 volumes are less than 80% full.
17 TB estimated capacity, 13 TB remaining (22% full)
drive 1 (/dev/nst0) slot : A00061L4(mounted)
In Gui i have changed the tapes were showing write protected. i have deleted the data and made them as appendable by running in cmd prompt. ( nsrjb -Lv -b "PCE ALGERIA" -R -S x(x =all above slots)). I was wondering does it pick up next tape automatically and when i check the output it still shows that same tape been mounted. Does it go to next tape automatically?
As i am new to networker and havent got a clue about how it works.
Any help will be great
Thanks,
