Does anybody know how to test a device on a HP-UX box? I am having trouble sending a database backup to a scsi 8mm tape device. I have been able to label a volume through TSM, using this same device, but when I send a database backup to the deviceclass I defined for that tape device, I get an error that says 'insufficient mount points available for removable media. The tape I labeled is still in the drive.
output from q drive
Library Name Drive Name Device Type On-Line
------------ ------------ ----------- -------------------
MANUAL DRIVE1 GENERICTAPE Yes
output from q path f=d
Source Name: xyzserver
Source Type: SERVER
Destination Name: DRIVE1
Destination Type: DRIVE
Library: MANUAL
Node Name:
Device: /dev/rmt/c0t0d0BEST
External Manager:
LUN:
Initiator: 0
Directory:
On-Line: Yes
Last Update by (administrator): ADMIN
Last Update Date/Time: 01/09/03 10:48:10
TSM Version 5.1.1
***This problem has been diagnosed...drive type HP C1533A not supported by TSM****
output from q drive
Library Name Drive Name Device Type On-Line
------------ ------------ ----------- -------------------
MANUAL DRIVE1 GENERICTAPE Yes
output from q path f=d
Source Name: xyzserver
Source Type: SERVER
Destination Name: DRIVE1
Destination Type: DRIVE
Library: MANUAL
Node Name:
Device: /dev/rmt/c0t0d0BEST
External Manager:
LUN:
Initiator: 0
Directory:
On-Line: Yes
Last Update by (administrator): ADMIN
Last Update Date/Time: 01/09/03 10:48:10
TSM Version 5.1.1
***This problem has been diagnosed...drive type HP C1533A not supported by TSM****