• Please help support our sponsors by considering their products and services.
    Our sponsors enable us to serve you with this high-speed Internet connection and fast webservers you are currently using at ADSM.ORG.
    They support this free flow of information and knowledge exchange service at no cost to you.

    Please welcome our latest sponsor Tectrade . We can show our appreciation by learning more about Tectrade Solutions
  • Community Tip: Please Give Thanks to Those Sharing Their Knowledge.

    If you receive helpful answer on this forum, please show thanks to the poster by clicking "LIKE" link for the answer that you found helpful.

  • Community Tip: Forum Rules (PLEASE CLICK HERE TO READ BEFORE POSTING)

    Click the link above to access ADSM.ORG Acceptable Use Policy and forum rules which should be observed when using this website. Violators may be banned from this website. This notice will disappear after you have made at least 3 posts.

Lanfree Configuration Issue

Rajatsm

ADSM.ORG Member
#1
Hi All,

Need a support for Lanfree configuration. This is first time i am doing it and struggling alot.

Screnario is:
Storage Agent (Client machine) --> Server A
TSM Server + library Client --> Server B
Library manager (TSM) --> Server C

Server A connect with Server B with NAT IP. Server B is managing client data & Server C is only Library manager.

I tried testing with making Server B as ibrary Manager and it works fine. But now when same task i am doing in production environment, where C is only Library Manager and now when i am running backup getting below error:

*****In dsmsta log i can see below logs
ANR0525W Transaction failed for session 24 for node CAMTPDB000BNCXA (AIX) - storage media inaccessible.
ANR8369E Library VTL05MTL is not defined.
ANR1404W Scratch volume mount request denied - mount failed.
ANR8369E Library VTL05MTL is not defined.
ANR1401W Mount request denied for volume K01347L3 - mount failed.
ANR8369E Library VTL05MTL is not defined.
ANR1404W Scratch volume mount request denied - mount failed.
ANR0525W Transaction failed for session 24 for node CAMTPDB000BNCXA (AIX) - storage media inaccessible.
ANR8369E Library VTL05MTL is not defined.
ANR1404W Scratch volume mount request denied - mount failed.
ANR8369E Library VTL05MTL is not defined.
ANR1401W Mount request denied for volume K01347L3 - mount failed.
ANR8369E Library VTL05MTL is not defined.
ANR1404W Scratch volume mount request denied - mount failed.
ANR0525W Transaction failed for session 24 for node CAMTPDB000BNCXA (AIX) - storage media inaccessible.
ANR8369E Library VTL05MTL is not defined.
ANR1404W Scratch volume mount request denied - mount failed.
ANR8369E Library VTL05MTL is not defined.
ANR1401W Mount request denied for volume K01347L3 - mount failed.
ANR8369E Library VTL05MTL is not defined.
ANR1404W Scratch volume mount request denied - mount failed.
ANR0525W Transaction failed for session 24 for node CAMTPDB000BNCXA (AIX) - storage media inaccessible.
ANR0409I Session 25 ended for server TSM1MTL (AIX).
ANR0403I Session 24 ended for node CAMTPDB000BNCXA (AIX)



******In dsmc log i can see below error
ANS1228E Sending of object '/admin/var/savevg.data/datavg.savevg.fri' failed.
ANS1312E Server media mount not possible

ANS1228E Sending of object '/admin/var/savevg.data/datavg.savevg.mon' failed.
ANS1312E Server media mount not possible

ANS1228E Sending of object '/admin/var/savevg.data/datavg.savevg.sat' failed.
ANS1312E Server media mount not possible

ANS1228E Sending of object '/admin/var/savevg.data/datavg.savevg.sun' failed.
ANS1312E Server media mount not possible

ANS1228E Sending of object '/admin/var/savevg.data/datavg.savevg.tue' failed.
ANS1312E Server media mount not possible

******rmt number on Server A are;
rmt1 Available 04-00-01 IBM 3580 Ultrium Tape Drive (FCP)
rmt2 Available 04-00-01 IBM 3580 Ultrium Tape Drive (FCP)
rmt4 Available 04-00-01 IBM 3580 Ultrium Tape Drive (FCP)
rmt5 Available 04-01-01 IBM 3580 Ultrium Tape Drive (FCP)
rmt6 Available 04-01-01 IBM 3580 Ultrium Tape Drive (FCP)
rmt7 Available 04-01-01 IBM 3580 Ultrium Tape Drive (FCP)
rmt8 Available 04-01-01 IBM 3580 Ultrium Tape Drive (FCP)
rmt9 Available 04-01-01 IBM 3580 Ultrium Tape Drive (FCP)

******And path are created like this
CAMTPDB000- SERVER VTL05_DRIV- DRIVE VTL05MTL /dev/rmt8 0 Yes E7311L 04/12/17
BNCXA_STA E01 15:24:09
CAMTPDB000- SERVER VTL05_DRIV- DRIVE VTL05MTL /dev/rmt2 0 Yes E7311L 04/12/17
BNCXA_STA E02 15:24:15
CAMTPDB000- SERVER VTL05_DRIV- DRIVE VTL05MTL /dev/rmt6 0 Yes E7311L 04/04/17
BNCXA_STA E03 15:11:30
CAMTPDB000- SERVER VTL05_DRIV- DRIVE VTL05MTL /dev/rmt1 0 Yes E7311L 04/04/17
BNCXA_STA E04 15:11:39
CAMTPDB000- SERVER VTL05_DRIV- DRIVE VTL05MTL /dev/rmt9 0 Yes E7311L 04/04/17
BNCXA_STA E05 15:11:46
CAMTPDB000- SERVER VTL05_DRIV- DRIVE VTL05MTL /dev/rmt3 0 Yes E7311L 04/12/17
BNCXA_STA E06 15:10:27


Please help any suggestion and advise is appreciable.
 

chad_small

ADSM.ORG Moderator
#2
You need to make sure you have the storage agent defined as a server on the library client and manager so the library manager can talk to the storage agent.

So the process is setup the storage agent to point to the library client TSM server and define the storage agent on both the client and library manager servers. The library client will pass the drive request to the manager who will then pass the info back to the storage agent on which drive it is allowed to use. You will define the paths for the storage agent on the library manager as you would for any library client.

I covered this back in 2006 and the process is still the same.
 

Rajatsm

ADSM.ORG Member
#3
Hi Chad,

Storage agent is defined as server on library client and Library manager both already, still not helping.

validate lanfree is also working fine


tsm: TSM1MTL>validate lanfree CAMTPDB000BNCXA CAMTPDB000BNCXA_STA
ANR0387I Evaluating node CAMTPDB000BNCXA using storage agent CAMTPDB000BNCXA_STA for LAN-free data movement.

Node Storage Operation Mgmt Class Destination LAN-Free Explanation
Name Agent Name Name capable?
----- -------- --------- ---------- ------------ ---------- --------------------
CAMT- CAMTPDB- BACKUP NBFG_LANF- NBFG_BACTAP- Yes
PDB- 000BNC- REE_MC E_VTL05
000- XA_STA
BNC-
XA
ANR1706I A ping request to server 'CAMTPDB000BNCXA_STA' was able to establish a connection by using administrator credentials.
ANR4547W The clock on the remote server CAMTPDB000BNCXA_STA differs from the clock on the local server by 468 seconds.
ANR4617I A ping request to server 'CAMTPDB000BNCXA_STA' was able to establish a connection by using server credentials.
ANR0388I Node CAMTPDB000BNCXA using storage agent CAMTPDB000BNCXA_STA has 1 storage pools capable of LAN-free data movement and 0 storage pools not capable of LAN-free data movement.

tsm: TSM1MTL>


:(
 

chad_small

ADSM.ORG Moderator
#5
OK so the library is defined as a shared library on the client that points to the library on the library manager. The library manager has the library defined and drives defined. The storage agent needs to talk to the library manager through the same IP as the library client has defined for the library manager. In other words the STA needs to be able to reach the library client over the same defined IP as the client uses to communicate with the library manager, if it does not then the setup wont work. Also the storage agent needs to be defined to the library manager and client using the same IP. This bit me in the ass years ago when my storage agent could talk to the manager but over a different IP than what the library client used.
 

Rajatsm

ADSM.ORG Member
#6
Thanks Marclant, But library is already defined.

[email protected] Below are my ServerB (Library Client ) and Server C (Library Manager) server information.
NOTE: Server A (Client machine) can connect Server A and Server B with there NAT IP (Start with 92.**.**.**) not with Original IP (Start with 10.**.**.**).
Please suggest what should i do in these configuration to make it correct.

****Server B Output
tsm: TSM1MTL>q server CAMTPDB000BNCXA_STA f=d

Server Name: CAMTPDB000BNCXA_STA --> This is Server A (Client Machine)
Comm. Method: TCPIP
Transfer Method: TCPIP
High-level Address: 129.39.200.139
Low-level Address: 1502
Description:
Allow Replacement: No
Node Name: TSM1MTL
Last Access Date/Time: 2017-04-13 08:33:35
Days Since Last Access: <1
Compression: No
Archive Delete Allowed?: (?)
URL:
Registration Date/Time: 2010-10-26 10:41:29
Registering Administrator: IE40451
Bytes Received Last Session: 263
Bytes Sent Last Session: 351
Duration of Last Session: 0.48
Pct. Idle Wait Last Session: 97.27
Pct. Comm. Wait Last Session: 0.00
Pct. Media Wait Last Session: 0.00
Grace Deletion Period: 5
Managing profile:
Server Password Set: Yes
Server Password Set Date/Time: (?)
Days Since Server Password Set: (?)
Invalid Sign-on Count for Server: 0
Virtual Volume Password Set: Yes
Virtual Volume Password Set Date/Time: 2015-04-07 03:32:04
Days Since Virtual Volume Password Set: 737
Invalid Sign-on Count for Virtual Volume Node: 0
Validate Protocol: All
Version: 7
Release: 1
Level: 1.100
Role(s): Storage Agent Event Logging Library Sharing
SSL: No

tsm: TSM1MTL>q server tsm4mtl f=d --> This is Library manager

Server Name: TSM4MTL
Comm. Method: TCPIP
Transfer Method: TCPIP
High-level Address: 10.64.119.72
Low-level Address: 1500
Description:
Allow Replacement: No
Node Name:
Last Access Date/Time: 2017-04-13 17:46:18
Days Since Last Access: <1
Compression: No
Archive Delete Allowed?: (?)
URL:
Registration Date/Time: 2016-12-28 10:35:42
Registering Administrator: E035A5
Bytes Received Last Session: 349
Bytes Sent Last Session: 417
Duration of Last Session: 0.53
Pct. Idle Wait Last Session: 77.52
Pct. Comm. Wait Last Session: 0.00
Pct. Media Wait Last Session: 0.00
Grace Deletion Period: 5
Managing profile:
Server Password Set: Yes
Server Password Set Date/Time: (?)
Days Since Server Password Set: (?)
Invalid Sign-on Count for Server: 0
Virtual Volume Password Set: No
Virtual Volume Password Set Date/Time: (?)
Days Since Virtual Volume Password Set: (?)
Invalid Sign-on Count for Virtual Volume Node: 0
Validate Protocol: No
Version: 7
Release: 1
Level: 7.0
Role(s): Library Sharing
SSL: No


******Server C (Library manager) Output


Server Name: CAMTPDB000BNCXA_STA --> This is Server A (Client Machine)
Comm. Method: TCPIP
Transfer Method: TCPIP
High-level Address: 129.39.200.139
Low-level Address: 1502
Description:
Allow Replacement: No
Node Name:
Last Access Date/Time: 2017-04-12 15:05:52
Days Since Last Access: 1
Compression: No
Archive Delete Allowed?: (?)
URL:
Registration Date/Time: 2017-01-31 14:22:12
Registering Administrator: E7311L
Bytes Received Last Session: 1,201
Bytes Sent Last Session: 244
Duration of Last Session: 0.77
Pct. Idle Wait Last Session: 99.22
Pct. Comm. Wait Last Session: 0.00
Pct. Media Wait Last Session: 0.00
Grace Deletion Period: 5
Managing profile:
Server Password Set: Yes
Server Password Set Date/Time: 2017-01-31 14:22:12
Days Since Server Password Set: 72
Invalid Sign-on Count for Server: 0
Virtual Volume Password Set: No
Virtual Volume Password Set Date/Time: (?)
Days Since Virtual Volume Password Set: (?)
Invalid Sign-on Count for Virtual Volume Node: 0
Validate Protocol: All
Version: 7
Release: 1
Level: 1.100
Role(s): Storage Agent Event Logging Library Sharing
SSL: No



Server Name: TSM1MTL
Comm. Method: TCPIP
Transfer Method: TCPIP
High-level Address: 10.64.10.26
Low-level Address: 1500
Description:
Allow Replacement: No
Node Name: TSM4MTL
Last Access Date/Time: 2017-04-13 17:49:37
Days Since Last Access: <1
Compression: No
Archive Delete Allowed?: (?)
URL:
Registration Date/Time: 2016-12-28 10:36:09
Registering Administrator: TSM1MTL
Bytes Received Last Session: 374
Bytes Sent Last Session: 251
Duration of Last Session: 0.06
Pct. Idle Wait Last Session: 76.19
Pct. Comm. Wait Last Session: 0.00
Pct. Media Wait Last Session: 0.00
Grace Deletion Period: 5
Managing profile:
Server Password Set: Yes
Server Password Set Date/Time: (?)
Days Since Server Password Set: (?)
Invalid Sign-on Count for Server: 0
Virtual Volume Password Set: Yes
Virtual Volume Password Set Date/Time: 2016-12-28 10:36:09
Days Since Virtual Volume Password Set: 106
Invalid Sign-on Count for Virtual Volume Node: 0
Validate Protocol: No
Version: 7
Release: 1
Level: 7.100
Role(s): Library Sharing
SSL: No
 

chad_small

ADSM.ORG Moderator
#8
So here is how I had IBM explain it to me. The Storage Agent connects to the library client and the library client then contacts to the library manager across its defined server IP and then attempts to direct the client to the library manager across that IP. Well if the client cannot connect to the library manager over the defined IP the connection fails. You will need to add the Storage Agent to the VLAN the servers use for communication or redefine the library client to talk to the library manager over the VLAN that the storage agent uses.
 

marclant

ADSM.ORG Moderator
#9
Have to follow the evidence. The suggestion based on the error is two parts, you confirmed the first part, now onto the 2nd.

You need to get rid of ANR8389E before being able to move forward.
 

Attachments

Advertise at ADSM.ORG

If you are reading this, so are your potential customer. Advertise at ADSM.ORG right now.

UpCloud high performance VPS at $5/month

Get started with $25 in credits on Cloud Servers. You must use link below to receive the credit. Use the promo to get upto 5 month of FREE Linux VPS.

The Spectrum Protect TLA (Three-Letter Acronym): ISP or something else?

  • Every product needs a TLA, Let's call it ISP (IBM Spectrum Protect).

    Votes: 7 23.3%
  • Keep using TSM for Spectrum Protect.

    Votes: 16 53.3%
  • Let's be formal and just say Spectrum Protect

    Votes: 4 13.3%
  • Other (please comement)

    Votes: 3 10.0%

Forum statistics

Threads
30,888
Messages
131,414
Members
21,194
Latest member
jamesmacd40