sweylman
ADSM.ORG Member
I'm trying to add a EMC Celerra and I'm getting this failure:
define path server_2 naslibr1 srctype=datamover desttype=library device=c64t0l0
ANR1737E DEFINE PATH: Device name c64t0l0 specified is invalid.
And here's what it looks like from the EMC side:
Scsi Device Table
name addr type info
tape1 c64t0l0 tape IBM ULT3580-TD1 4561
ttape1 c80t0l0 tape IBM ULT3580-TD1 4561
jbox2 c80t0l1 jbox IBM 03584L32 409013000000011142 0☻
tttape1 c96t0l0 tape IBM ULT3580-TD1 4561
Up to this point I've been using the EMC "Configuring NDMP Backups with Celerra and IBM Tivoli Storage Manager" and it's worked pretty well...Only now I'm stumped.
Does anyone out there have any ideas? (And yes, I do have a PMR open, but they always take soooooo long!)
define path server_2 naslibr1 srctype=datamover desttype=library device=c64t0l0
ANR1737E DEFINE PATH: Device name c64t0l0 specified is invalid.
And here's what it looks like from the EMC side:
Scsi Device Table
name addr type info
tape1 c64t0l0 tape IBM ULT3580-TD1 4561
ttape1 c80t0l0 tape IBM ULT3580-TD1 4561
jbox2 c80t0l1 jbox IBM 03584L32 409013000000011142 0☻
tttape1 c96t0l0 tape IBM ULT3580-TD1 4561
Up to this point I've been using the EMC "Configuring NDMP Backups with Celerra and IBM Tivoli Storage Manager" and it's worked pretty well...Only now I'm stumped.
Does anyone out there have any ideas? (And yes, I do have a PMR open, but they always take soooooo long!)