Stephan
ADSM.ORG Senior Member
- Joined
- Jun 7, 2004
- Messages
- 649
- Reaction score
- 2
- Points
- 0
- Location
- Great White North
- Website
- www.twosix.ca
Hi.
We have an IBM DS4700 with 2 EXP810 already configured and up and running. We need to install a new EXP810 enclosure to that setup.
The original config was done as per the IBM Installation Book (see pic 1) for one ds4700 with 2 exp810. If i am to add a new exp810, the cabling has to change a bit (see pic 2) and i was wondering if i could do this safely, with no impacts? TECHNICALLY, the loops are redundant...but about past experience from some of you guys?
Thanks.
We have an IBM DS4700 with 2 EXP810 already configured and up and running. We need to install a new EXP810 enclosure to that setup.
The original config was done as per the IBM Installation Book (see pic 1) for one ds4700 with 2 exp810. If i am to add a new exp810, the cabling has to change a bit (see pic 2) and i was wondering if i could do this safely, with no impacts? TECHNICALLY, the loops are redundant...but about past experience from some of you guys?
Thanks.