Configure backup to tape

Micek

Newcomer
Joined
Nov 18, 2016
Messages
2
Reaction score
0
Points
0
I am new to TSM and I need help.
We implemented Tivoli TSM v6.3.3.
We have tape library attached over SAS to TSM server: IBM 3573 tape library
I need to configure direct backup to tape of one member server.
can anybody help me how I need to configure TSM for backup to tape...
what steps should I perform to accomplish scheduled backup.
You can email me to [email protected]

Any help I would appreciated.

Thank you in advance.
 
It's a big order, too much for here. I'll give you documentation to get started. So obviously the first step will be to setup the tape library, you can use this chapter for this:
https://www.ibm.com/support/knowledgecenter/SSGSG7_6.3.4/com.ibm.itsm.srv.doc/t_config_srv_stg.html

Then at a high level, you need to have a management class with a backup copygroup that uses the tape storage pool. This is all done through policy management:
https://www.ibm.com/support/knowled....ibm.itsm.srv.doc/c_mplmntpol_polclidata.html
 
T
It's a big order, too much for here. I'll give you documentation to get started. So obviously the first step will be to setup the tape library, you can use this chapter for this:
https://www.ibm.com/support/knowledgecenter/SSGSG7_6.3.4/com.ibm.itsm.srv.doc/t_config_srv_stg.html

Then at a high level, you need to have a management class with a backup copygroup that uses the tape storage pool. This is all done through policy management:
https://www.ibm.com/support/knowled....ibm.itsm.srv.doc/c_mplmntpol_polclidata.html
thank you very much
 
Back
Top