1. Forum Rules (PLEASE CLICK HERE TO READ BEFORE POSTING) Click the link to access ADSM.ORG Acceptable Use Policy and forum rules which should be observed when using this website. Violators may be banned from this website. This message will disappear after you have made at least 12 posts. Thank you for your cooperation.

Changing maintenance script run time

Discussion in 'TSM Operation' started by daveisme, Mar 7, 2011.

  1. daveisme

    daveisme New Member

    Joined:
    Dec 15, 2006
    Messages:
    66
    Likes Received:
    0
    We are planning to run maintenance on our tape library Saturday and the time seletced to do so is during the time our TSM 6.2 Maintenance script runs. I want to change the time the script runs from 7:00 AM to 13:00 for Saturday only. How do I change the run time of the Maintenance script for that one day?
     
  2.  
  3. fuzzballer

    fuzzballer New Member

    Joined:
    Jun 5, 2004
    Messages:
    204
    Likes Received:
    1
    Occupation:
    It Specialist/ TSM Administrator
    Location:
    Kansas
    You could do one of two things as far as I know and I would opt for number 2.
    1. Set the current schedule to inactive and define a one time schedule for the time you want it to run or
    2. update the schedule start time to 13:00 and then after it has run update the time again back to its original time.
     
  4. daveisme

    daveisme New Member

    Joined:
    Dec 15, 2006
    Messages:
    66
    Likes Received:
    0
    If I set the current schedule to active=no and set an expiration date of Saturdays date will that change the active back to active or will it expire the schedule all together? (keeping the active to no).
     
  5. tmmckinn

    tmmckinn New Member

    Joined:
    Jun 1, 2006
    Messages:
    39
    Likes Received:
    0
    Occupation:
    SAII City of Wichita
    Location:
    Wichita
    You'll probably have to use two schedules, one for Sun-Fri, and one for Saturday. Specify "DayofWeek" in each schedule, and apply the appropriate start time. Your Sun-Fri schedule would be updated with "day=sun,mon,tue,wed,thu,fri" with no blanks inbetween day specifications.
     

Share This Page