Re: [Veritas-bu] HPUX 11.31

Note that the link is for HP-UX 11.11 (a/k/a 11iV1) but mentions a patch for HP-UX 11.23 (a/k/a 11iV2). The OS here is 11.31 (a/k/a 11iV3). Unfortunately even when HP issues the same patch for multiple versions of the OS they do not have the same patch number for the different versions of OS. You’d need to determine the equivalent patch for 11.31 (if there is one – often fixes that were done via patch in earlier OS versions are built into the newer versions so aren’t patches any longer).

Also they supersede patches so to check for a given patch isn’t as simple as doing swlist for the package as there may be a later one that includes it. You can find out by doing:

grep <package> /var/adm/sw/products/PH*/README

For any file shown by above view the file and see if the package you were interested is in the “Supersedes” section. If it is then it means the PH file (patch) you found includes that fix. You would then want to examine detail in the README as it is possible the superseding patch fixed an issue caused by an earlier one.

We don’t run any 11.31 here so I’m not sure what differences there are so far as NBU is concerned. NBU 7.1 supports 11.31 but I don’t see it as an option in NBU 6.5. “aCC” is HP’s Ansi C++ stuff so libraries etc… are different so your error may simply be that NBU 6.5 doesn’t know how to talk to HP-UX 11.31.

From: veritas-bu-bounces AT mailman.eng.auburn DOT edu [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Kalusche, Dan
Sent: Thursday, September 29, 2011 8:52 AM
To: William Brown; WEAVER, Simon (external); VERITAS-BU AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] HPUX 11.31

That'll work, or I believe there was a patch that superceeded this one that will fix as well...

From: William Brown [mailto:william.d.brown AT gsk DOT com]
Sent: Thursday, September 29, 2011 7:51 AM
To: WEAVER, Simon (external); Kalusche, Dan; VERITAS-BU AT mailman.eng.auburn DOT edu
Subject: RE: HPUX 11.31

Actually you have to *remove* a patch I think

http://www.backupcentral.com/phpBB2/two-way-mirrors-of-external-mailing-lists-3/symantec-netbackup-18/warning-about-hp-ux-11-11-patch-phss-38154-95477/

William D L Brown

From: veritas-bu-bounces AT mailman.eng.auburn DOT edu [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of WEAVER, Simon (external)
Sent: 29 September 2011 13:36
To: Kalusche, Dan; VERITAS-BU AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] HPUX 11.31

Ok well I am sure I have the client installed.

This is what I still get...

aCC runtime: Use of "-mt" must be consistent during both compilation and linking.

Would be nice to know what patch it was :-)

From: Kalusche, Dan [mailto:Dan.Kalusche AT andersencorp DOT com]
Sent: Thursday, September 29, 2011 1:34 PM
To: WEAVER, Simon (external); VERITAS-BU AT mailman.eng.auburn DOT edu
Subject: RE: HPUX 11.31

There's a HPUX patch that will take care of this. I had it in my saved folders, but for some reason all my saved emails are now gone...

The hits just keep on coming...!

Anyway, this was a problem way back, and the patch application on the client should take care of it. I think this occured on both 11.23 and 11.31.

Wish I could be more help about the patch number, but if I can recover my saved emails, I'll forward the info.

From: veritas-bu-bounces AT mailman.eng.auburn DOT edu [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of WEAVER, Simon (external)
Sent: Thursday, September 29, 2011 1:27 AM
To: VERITAS-BU AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] HPUX 11.31

Not knowing Unix well, I am trying to get implemented a NBU 6.5 Client on Unix, they were given a Unix CD, which apparantly contained the client.

When I create a policy and add the client, I have to choose from a list (Doesnt seem to auto detect like Windows).

Unix Guy states its a 9000/800/rp7440 on HPUX 11.31, but I can see HP9000-800 HPUX11.23 for this hardware and OS platform.

So chose it, ran the job I get this...

29/09/2011 07:24:55 - connecting
29/09/2011 07:24:56 - Error bpbrm(pid=660) from client <Server>: aCC runtime: Use of "-mt" must be consistent during both compilation and linking.

29/09/2011 07:24:56 - connected; connect time: 00:00:01
29/09/2011 07:24:57 - end writing
file read failed(13)

Does anyone know if 6.5.6 Windows Master will allow a 6.5 client to run on this box? Also, did appear to me that maybe they need to download the latest update pack so its standard across the board.

Any input appreciated.
Thanks
Regards

Simon

This e-mail was sent by GlaxoSmithKline Services Unlimited
(registered in England and Wales No. 1047315), which is a
member of the GlaxoSmithKline group of companies. The
registered address of GlaxoSmithKline Services Unlimited
is 980 Great West Road, Brentford, Middlesex TW8 9GS.

Athena®, Created for the Cause™

Making a Difference in the Fight Against Breast Cancer

---------------------------------
CONFIDENTIALITY NOTICE: This e-mail may contain privileged or confidential information and is for the sole use of the intended recipient(s). If you are not the intended recipient, any disclosure, copying, distribution, or use of the contents of this information is prohibited and may be unlawful. If you have received this electronic transmission in error, please reply immediately to the sender that you have received the message in error, and delete it. Thank you.
----------------------------------

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu