Re: [Veritas-bu] My Qlogic HBA can see the library, but not the drives
2011-07-01 04:09:17
Hi,
I used to have a similar configuration, try rebooting your adapter/NSR
device or login and look at the errors/syslog.
Justin.
On Thu, 30 Jun 2011, xiekai wrote:
> Hi I have an old StorageTek L80 that has 4 LTO3 drives, they are SCSI but
> the library also have a SCSI to FC bridge router, it is connected to my
> master/media server via SAN fabric. Couple of days agao, all of sudden I
> can't see the LTO3 drives anymore, the host only sees the library (san surfer
> shows the same thing). Are there any settings in the QLogic card that is
> making the tape drives disappear?
>
> Thanks
>
> Kai
>
> +----------------------------------------------------------------------
> |This was sent by kxie AT eatonvance DOT com via Backup Central.
> |Forward SPAM to abuse AT backupcentral DOT com.
> +----------------------------------------------------------------------
>
>
> _______________________________________________
> Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Re: [Veritas-bu] My Qlogic HBA can see the library, but not the drives,
Justin Piszcz <=
|
|
|