The SAN client is not working correctly since it came out.
(It took Symantec until 6.5.4 to remove the fragment issue that i did report 
with version 6.5.1)
I'm working on a case since Netbackup 6.5.1 and still restores are failing most 
of the times.
Fell free to link your case with my case number (410-654-721).
The more customers report this unacceptable situation the more pressure for 
Symantec to fix this issue.

For me it worked to set the SAN client to never under device section - this 
switched to LAN and the restores worked always this way.

To permanently disable i would recommend:

bpclntcmd -sanclient 0
Stop (windows) or kill (Unix/Linux) the nbftclnt service process on the client
You should now be able to delete the client from the GUI (SAN Clients in 
Devices)

Best Regards,
Ernst

+----------------------------------------------------------------------
|This was sent by wanner.ernst AT synthes DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------


_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu