All of my san drives show bus 0, thought this was normal.
-----Original Message-----
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Brandon35
Sent: Thursday, July 08, 2010 3:25 PM
To: VERITAS-BU AT MAILMAN.ENG.AUBURN DOT EDU
Subject: [Veritas-bu] SAN Switch Change caused NBU7 to lose tape drives
Im having tape drives show up with the same BUS address...
Drive 1 Location: Bus Number 0, Target ID 1, LUN 0
Drive 2 Location: Bus Number 0, Target ID 2, LUN 0
Drive 3 Location: Bus Number 0, Target ID 3, LUN 0
Drive 4 Location: Bus Number 0, Target ID 4, LUN 0
Drive 5 Location: Bus Number 0, Target ID 5, LUN 0
Drive 6 Location: Bus Number 0, Target ID 1, LUN 0
Drive 7 Location: Bus Number 0, Target ID 2, LUN 0
Drive 8 Location: Bus Number 0, Target ID 3, LUN 0
Drive 9 Location: Bus Number 0, Target ID 4, LUN 0
What would cause this and why?
+----------------------------------------------------------------------
|This was sent by brandon.pawoll.ctr AT mda DOT mil via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|