Veritas-bu

Re: [Veritas-bu] Robot disappeared from OS

2010-02-11 15:32:33
Subject: Re: [Veritas-bu] Robot disappeared from OS
From: "Chapman, Scott" <Scott.Chapman AT icbc DOT com>
To: "Dushyant Mehta" <scorpio21179 AT gmail DOT com>, <veritas-bu AT mailman.eng.auburn DOT edu>
Date: Thu, 11 Feb 2010 12:32:21 -0800

You aren’t going to see anything with sgscan unless cfgadm –al sees the changer and the tape.  I would work more with SUN to confirm there is nothing wrong with the HBA…maybe try a diff HBA port. 

 

Scott Chapman

Senior Technical Specialist

Storage and Database Administration

ICBC - Victoria

Ph:  250.414.7650  Cell:  250.213.9295

From: veritas-bu-bounces AT mailman.eng.auburn DOT edu [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Dushyant Mehta
Sent: Thursday, February 11, 2010 12:18 PM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] Robot disappeared from OS

 

All,

We have STK L180 tape library connected to a Solaris 10 master/media server.Until 3 days back we were able to see tape drives and robots  and now the robot has disappeared.  Initially when we were seeing the robot, we were not able to configure it in netbackup. when we did a scan -changer on that robot it used to report "0" drives and "0" slots whereas the library has 6 drives and 84 slots. To fix that problem Symantec suggested rebuilding the sg driver and told me to remove everything from /dev/rmt/*cbn and /dev/sg directories. After doing that and rebooting the master with a reconfiguration we lost the robot.

Everything is connected to McData switch and on the switch side I see all the ports logging in without any error.However when i run cfgadm -al it shows this for the robot wwn :

c3::500104f0005859c8        unavailable      connected     configured      failed

I have been working with Symantec and Sun and both are unable to identify the problem.

I have tried resetting hba, resetting the robot, rebooting the complete library etc but still sgscan and scan -changer does not show the robot.

I have 2 questions :

1) When the robot does not report on correct info in scan -changer command, what can be the issue ?
2) What can we do to see the robot back ?

We are on NBU 6.0 MP6, with Solaris 10 on master, Emulex HBA, Mc Data Switch, STK L180 tape library.

Thanks,

Dushyant Mehta


This email and any attachments are intended only for the named recipient and may contain confidential and/or privileged material. Any unauthorized copying, dissemination or other use by a person other than the named recipient of this communication is prohibited. If you received this in error or are not named as a recipient, please notify the sender and destroy all copies of this email immediately.

2010 Olympic and Paralympic Logo | ICBC Logo

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu