Hi,

Is the robotic controller host defined on the server that the drives are 
connected to?

Justin.

On Sat, 30 Jan 2010, NBU wrote:

>
> Hi Forum,
>
> My backup environment has 6.5.3 Master ---> controls robot.
> 2 Media Server 6.5.3 ----> controls drives.
>
> Tape Library is SL500 with 16 Drives, 8 on each media server.
>
> Now the problem is 1 of the media server is showing all 8 drives on OS level 
> when check through sgscan etc. But when i do device configuratin from NB GUI 
> it shows me the drives as standalone. It is not coming under robot control.
>
> Whereas the other medias server is working fine.
>
> When i manually add the drives through tpconfig it is accepting it and coming 
> under robot control.
>
> Can you suggest/advice me as to where the problem is and what i can do to 
> prevent this.
>
> Thanks in Advance.
>
> +----------------------------------------------------------------------
> |This was sent by qureshiumar AT rediffmail DOT com via Backup Central.
> |Forward SPAM to abuse AT backupcentral DOT com.
> +----------------------------------------------------------------------
>
>
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu