[Veritas-bu] Anyone reliably using a STK L1400 Tape Silo with 9940B tape
2009-09-17 21:13:19
disable Fast Load on the L1400 through the front panel
hit menu key>> I think its under library config if I remember correctly.
do you get any SCSI errors in the OS logs?
JBrownell wrote:
> Just coming back from our DR where we end up using a different tape silo than
> we have at home. At home we have a STK SL8500 silo and at DR we use a STK
> L1400. According to the DR provider this used to be 2 L700's and they were
> combined together to make the L1400. Ever since they moved us to this L1400
> we have had many issues with the library dropping the drives, dropping
> communications back to our master server and randomly not restoing all of the
> selected data during NetBackup restore jobs. This test we had everything up
> and running quickly at the start, ran for about 20 hours then lost everything
> and it took us and NetBackup support about 20 hours to get NetBackup to
> reconnect to the silo again.
>
> Any insight or similar experiences would be appreciated . Thanks.
+----------------------------------------------------------------------
|This was sent by solaris AT cablespeed DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|