If you want to test newly created or updated existing policies, the following 
command will ensure your changes are available at runtime.

nbpemreq -updatepolicies

__________________________
Chris D Adkisson

-----Original Message-----
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu 
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of 
Donaldson, Mark
Sent: Thursday, July 02, 2009 9:49 AM
To: Heathe Kyle Yeakley; VERITAS-BU AT MAILMAN.ENG.AUBURN DOT EDU
Subject: Re: [Veritas-bu] Incorrect Storage Unit

If you did it too fast, changes to policies can take up to 10 minutes to
be implemented (by default).    

-----Original Message-----
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Heathe
Kyle Yeakley
Sent: Thursday, July 02, 2009 10:40 AM
To: VERITAS-BU AT MAILMAN.ENG.AUBURN DOT EDU
Subject: [Veritas-bu] Incorrect Storage Unit

I have installed a new tape library(tld1). I still have my original 
library (tld0) connected. I've taken a couple of policies, copied them 
to new policies and changed only the storage unit within the policy from

media-server-tld0 to media-server-tld1. I manually executed a test 
backup of PolicyA-TLD1 and saw exactly what I expected to see: The 
policy contacted the new robot, mounted a new tape and ran the backup on

the new library, finishing with status code 0.

When I do the same thing with a second policy, PolicyB-TLD1 is 
contacting the original library, mounting tapes in the original 
library... etc. It finishes successfully, but I can't figure out why it 
isn't contacting the new library. I've gone back in and made sure that 
the storage unit in PolicyB-TLD1 is TLD1 and not TLD0, and it is set 
correctly.

Any thoughts while I dig around the Symantec website?

Thank you.

  - Heathe Kyle Yeakley
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
This communication is for informational purposes only. It is not
intended as an offer or solicitation for the purchase or sale of
any financial instrument or as an official confirmation of any
transaction. All market prices, data and other information are not
warranted as to completeness or accuracy and are subject to change
without notice. Any comments or statements made herein do not
necessarily reflect those of JPMorgan Chase & Co., its subsidiaries
and affiliates.

This transmission may contain information that is privileged,
confidential, legally privileged, and/or exempt from disclosure
under applicable law. If you are not the intended recipient, you
are hereby notified that any disclosure, copying, distribution, or
use of the information contained herein (including any reliance
thereon) is STRICTLY PROHIBITED. Although this transmission and any
attachments are believed to be free of any virus or other defect
that might affect any computer system into which it is received and
opened, it is the responsibility of the recipient to ensure that it
is virus free and no responsibility is accepted by JPMorgan Chase &
Co., its subsidiaries and affiliates, as applicable, for any loss
or damage arising in any way from its use. If you received this
transmission in error, please immediately contact the sender and
destroy the material in its entirety, whether in electronic or hard
copy format. Thank you.

Please refer to http://www.jpmorgan.com/pages/disclosures for
disclosures relating to European legal entities.
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu