no need to enable compression in the policy, in fact it should not be 
checked...only in the device name you choose (/dev/rmt/Xcbn)

something changed or you are "sparking the chronic"

please post proof of this

oersted


ramaswamy savi wrote:
> Hi ALL, 
> 
> We have 2 LTO3 standlone Tape drive connected via SCSI cable in Sunfire-V890 
> server and same configured via Netbackup 6.0 MP5. From previous week onwards, 
> LTO3 tape drive are capable of writing only 400GB, it's not exceeding more 
> than 400GB. Compression enabled in policy also. Pls provide solution ASAP. We 
> tested the same in New tape ( HP Ultrium LTO3) also, but still its writing 
> only 400 GB and throwing an error requesting any new media 
> 
> Eailer 700 GB were able to write the data in HP LTO3 drive
> 
> No changes made in configuration file also, so pls provide solution ASAP. 
> 
> Tape drive : LTO3 Sun MicroSystem
> Tape Model : HP Ultrium LTO3/ 800GB rw 
> 
> Regards,
> Hemalatha.


+----------------------------------------------------------------------
|This was sent by solaris AT cablespeed DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------


_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu