Re: [Veritas-bu] Using Fiber Channel Drives in 6.5

Subject:	Re: [Veritas-bu] Using Fiber Channel Drives in 6.5
From:	"Clausen, Matt R[EQ]" <Matthew.R.Clausen AT Embarq DOT com>
To:	"'Thompson, Jeff'" <JThompson AT edmunds DOT com>, "VERITAS-BU AT mailman.eng.auburn DOT edu" <VERITAS-BU AT mailman.eng.auburn DOT edu>
Date:	Wed, 4 Mar 2009 14:35:57 -0600

What’s sgscan showing? You may need to go through the whole sg driver installation process so the drives are visible to NBU.

From: veritas-bu-bounces AT mailman.eng.auburn DOT edu [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Thompson, Jeff
Sent: Wednesday, March 04, 2009 3:05 PM
To: VERITAS-BU AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] Using Fiber Channel Drives in 6.5

We’ve recently purchased a Scaler i500 with 2 fiber channel drives. This is being connected via HBA to our RHEL 3 Master Server (running the 2.4 kernel). I have verified that the OS sees the card and drives but I can’t get them installed in NBU. I’m guessing that I’m missing a SAN license, is this correct? Thanks!

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

<Prev in Thread]	Current Thread	[Next in Thread>
[Veritas-bu] Using Fiber Channel Drives in 6.5, Thompson, Jeff Re: [Veritas-bu] Using Fiber Channel Drives in 6.5, Tim Hoke Re: [Veritas-bu] Using Fiber Channel Drives in 6.5, Clausen, Matt R[EQ] <=