Hi all

I have Sun server T5140 run Solaris 10 Sparc, when i connect it with Tape SL48 
via SAN. Server can not detect robotic, and only detect tape driver so that 
Netbackup cannot detect robotic . Can you guide me how to config driver for 
robotic.

root@backup # /usr/openv/volmgr/bin/sgscan all
/dev/sg/c0t0l0: Disk (/dev/rdsk/c1t0d0): "LSILOGICLogical Volume"
/dev/sg/c0t2l0: Disk (/dev/rdsk/c1t2d0): "LSILOGICLogical Volume"
/dev/sg/c0tw500110a0008d1f7al0: Tape (/dev/rmt/0): "HP      Ultrium 4-SCSI" 
/dev/sg/c0tw500110a0008d1f81l0: Tape (/dev/rmt/1): "HP      Ultrium 4-SCSI

Thanks

+----------------------------------------------------------------------
|This was sent by kinan_kazuki AT yahoo DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------


_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu