|
Re: [Veritas-bu] DR compatibility
2009-02-09 10:58:23
Folks, does anybody have 256K data buffer tuning in Netbackup with SCSI attached LTO tape drives? If yes, which SCSI card I should use. I have all fiber attached tape drives at the primary sites and I need to know if I can use scsi attached tape drives at the dr site, and then I will be able to read tape media at the dr site that are written at the primary sites.
Thank you
On Thu, Feb 5, 2009 at 8:16 PM, rmg <netbackup-forum AT backupcentral DOT com> wrote:
masterbo wrote:
> my understanding, you used 2xLTO4 tape drives, but I am looking for 4 tape drives. I can see SL48 can hold 4 half height tape drives, but no fiber attached and Ultra 160 SCSI or 2 full height tape drives Ultra 320/4 G FC. Please let me know which SL48 configuration in your case.
>
Right, 2xLTO4 FC, full height drives. Having only two drives could be a bottleneck, but our DR plan mainly depends on live replication to standby servers anyway.
+----------------------------------------------------------------------
|This was sent by rmg AT ua DOT edu via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|
