Dave,
The 6.5_CLIENTS2 tarball should be the one you need. That should be the one
with the Linux client files in it (1 is HP-UX, AIX, etc. and 3 is mostly
Solaris). The file you downloaded is the actual NetBackup installation for a
master or media server.
Once you install the client, then you would install the 6.5.X CLT and JAV
patches.
-----Original Message-----
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Dave
Markham
Sent: Wednesday, December 17, 2008 8:19 AM
To: Spearman, David
Cc: veritas-bu AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] 6.5 linux client software help
Cheers i am just downloading NetBackup_6.5_Linux2.4.tar.gz from the
fileconnect site after getting a serial number from the project manager.
Issue is i only need the client software, so am a bit unsure how or what
needs installing as i have always pushed software out from unix master
or media servers before.
I'm assuming getting the linux tar file is the master server software
but gives the option to install client only? Question then is do i
assume i dont need the 6.5_CLIENTS1,2 or 3 tars, plus the patches from
the ftp site for linux suggest i need the CLT patch as a prerequisite,
but i've only installed these on masters before and updated clients.
With the master being windows i'm a bit stuck.
I'm trying to read documentation but as you probably know it sends you
all over the place referencing diff docs etc.
Cheers
Spearman, David wrote:
> Dave,
>
> Assuming you have access to the licensing portal you can download all
> the "master" software from there. It is still a painful thing to wind
> your way through but it is available. After that the patches can be
> downloaded from the ftp site.
>
>
> https://licensing.symantec.com/acctmgmt/index.jsp
>
> David Spearman
> County of Henrico
>
> -----Original Message-----
> From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
> [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Dave
> Markham
> Sent: Wednesday, December 17, 2008 8:05 AM
> To: veritas-bu AT mailman.eng.auburn DOT edu
> Subject: [Veritas-bu] 6.5 linux client software help
>
> Guys i'm being put under pressure by management to assist in a system,
> i've had nothing to do with design and build, to get a linux redhat
> client installed for NBU 6.5
>
> As far as i can ascertain the master/media is a windows server. I'm a
> solaris engineer and know if the master were unix i could simply push
> the correct client software out to the linux client. With windows i
> assume this is not possible??
>
> Which brings me to where to i get the linux 6.5 client software from? I
> don't have the media.
>
> On the symantec site i see various patches for 6.5.1 CLT containing all
> the client binaries, but this is normally installed on the unix server
> isn't it? Can this just be installed on a linux client as is with no
> previous version on it?
>
> Any pointers would be appreciated
>
> Dave
> _______________________________________________
> Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
>
>
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
